What size speakers are in a 92 S10?
In most 1992 S-10 pickups, the front doors house 6.5-inch speakers, the dash typically uses 4x6-inch speakers, and rear speakers (where equipped on extended cabs) are commonly 4x6-inch or 5.25-inch depending on the trim. Exact sizes vary by configuration, so verify on your specific model.
Typical configurations by cab style
Regular Cab (two-door)
Regular cab models generally featured a front door speaker setup and a minimal or absent rear speaker arrangement. The following sizes represent common factory configurations for this cab style.
- Front doors: 6.5-inch speakers
- Dashboard: 4x6-inch speaker behind a dash grille (varies with radio option)
- Rear area: typically none from the factory; any rear speakers would be aftermarket or added with an extended-cab upgrade
Regular cab owners upgrading sound should plan for a 6.5-inch front door replacement and evaluate the dash speaker size based on the original radio option.
Extended Cab (Xcab)
Extended cab models added rear seating and typically included rear-side speakers or rear shelf speakers in some trim levels. The sizes below reflect common factory configurations for these variants.
- Front doors: 6.5-inch speakers
- Rear side panels / rear doors: 4x6-inch or 5.25-inch speakers, depending on trim and factory setup
- Dash: 4x6-inch speaker (consistent with many trims that used a similar dash speaker size to the Regular Cab)
Extended cab configurations often offer more options for rear-fill speakers, but sizes can still vary by trim level and whether the vehicle shipped with an upgraded factory stereo.
How to confirm the exact size on your truck
Sizes can vary by option, radio, and whether the vehicle has been upgraded. Use these steps to verify the precise dimensions for your specific 1992 S-10:
- Open the door panel and measure the speaker cutout diameter to confirm the front-door size.
- Inspect the dash grille or speaker housing to identify the dash speaker size (often 4x6 inches, but check your unit).
- Check the rear area (rear doors or rear shelf) for speaker size if you have an Extended Cab; measure or look up the OEM part number for your trim.
- Consult the factory service manual or parts catalog for your exact VIN/trim code, which can confirm size and mounting formats.
- When replacing, consider matching impedance (typically 4 ohms for GM trucks of this era) and mounting depth to fit without modification.
Verifying the exact sizes on your own vehicle ensures a correct replacement and preserves audio performance.
Summary
The 1992 Chevy S-10’s speaker sizes depend on cab configuration and trim. Most Regular Cab models use 6.5-inch front-door speakers with 4x6-inch dash speakers, while Extended Cabs add rear speakers that are commonly 4x6-inch or 5.25-inch. Always verify against your VIN and trim level, as factory configurations differed and aftermarket upgrades are common.
Is the 1992 Chevy S10 reliable?
As a whole, consumers found the vehicle's reliability and value to be its strongest features and comfort to be its weakest. 148 out of 258 of owners (57% of them) rank the 1992 S10 five out of five stars. Overall, consumers seem aligned in their opinions of the 1992 Chevrolet S10.
What size are the dash speakers on a Chevy S10?
4 X 6"
4 X 6" DASH SPEAKER PROVISION.
How much horsepower does a 1992 4.3 S10 make?
The 1992 S10 Regular Cab ranges in power from the Long Bed with 105 horsepower to the EL Short Bed with 160 horsepower.
What size speakers are in a 1992 Chevy S10?
Speakers that fit your 1992 Chevrolet S10*
| Speaker location | Speaker sizes** |
|---|---|
| Corner Dash | 4x6" |
