What size tires are on a 2010 Honda Odyssey?
The typical stock tire size for a 2010 Honda Odyssey is P235/65R16 on the standard 16-inch wheels; higher trims with larger 17-inch wheels use P235/60R17. Always verify the exact size for your vehicle using the driver’s door placard or the owner’s manual, as wheel/tire configurations can vary by trim and market.
Understanding tire sizes
Tire size codes are standardized and tell you the type of tire, its width, aspect ratio, and the wheel diameter it fits. For example, P235/65R16 breaks down as follows: P for passenger vehicle, 235 mm tire width, 65% aspect ratio (sidewall height is 65% of the width), R for radial construction, and 16 inches for the wheel diameter. Matching these numbers to your vehicle ensures proper fit, ride quality, and speedometer accuracy.
Stock tire sizes by trim
The Odyssey’s wheel and tire configuration varied by trim level. The following sizes cover the most common factory setups for the 2010 model year.
- LX and EX trims with 16-inch wheels: P235/65R16
- EX-L and Touring trims with 17-inch wheels: P235/60R17
Note: There were regional and optional-wheel packages that could alter these sizes. Always confirm with the door jamb placard or the official owner’s manual for your exact build.
How to verify your tire size
To confirm the precise size on your particular vehicle, use these steps.
- Look at the tire sidewall for the size printed on the tire (for example, P235/65R16).
- Check the driver’s door jamb placard for the recommended size and tire specification.
- Refer to the owner’s manual or a Honda dealer’s service documentation for the exact specification.
- Note any regional or optional-wheel variations that might apply to your vehicle.
Confirming the correct size is essential to maintain handling, fuel economy, and speedometer accuracy. If you’re unsure, consult a tire professional or Honda dealership.
Regional and trim variations
In some regions, or on specific package combinations, the Odyssey may have different wheel sizes or tire specs. Always base replacements on the official placard on the door jamb or the exact specification listed in the owner’s manual for your VIN and market.
Replacement considerations
When replacing tires, several factors influence the correct choice beyond the size alone. Consider the following guidelines to keep performance and safety consistent with the factory setup.
- Stick to the same size as the factory specification (or a listed equivalent) to preserve handling and speedometer accuracy.
- Verify load index and speed rating are appropriate for the vehicle’s weight and typical driving conditions.
- Replace all four tires to maintain even traction and stability, unless you’re only replacing two and the remaining tires have ample tread and identical size.
If in doubt, seek guidance from a qualified tire technician or Honda dealer to ensure compatibility with your vehicle’s suspension, steering, and TPMS.
Summary
For a 2010 Honda Odyssey, most models with 16-inch wheels used P235/65R16 tires, while higher-trim configurations with 17-inch wheels used P235/60R17. Always verify with the driver’s door placard or the owner’s manual, as exact sizes can vary by trim and region. When replacing tires, match the specified size, load index, and speed rating to maintain safety and performance.
