What size tires can be put on a 2010 Tundra?
Commonly, a 2010 Tundra uses about 265/70R16 tires on 16-inch wheels or 275/65R18 tires on 18-inch wheels, but the exact size depends on trim and the factory wheel you have. With proper wheels, spacers, and a suspension setup, you can go larger, though clearance, speedometer accuracy, and alignment must be considered.
The 2010 Tundra is a first-generation model with multiple trims and optional wheel configurations. The precise tire size for your truck is listed on the door placard and in the owner's manual, and it can be confirmed against the vehicle’s VIN/build sheet. This article outlines typical stock options and general upgrade guidance, along with fitment considerations.
Stock tire sizes by wheel option
To understand what your Tundra came with, check the factory wheel size and the corresponding tire size. The following sizes reflect common configurations from that era.
- 16-inch wheels: 265/70R16
- 18-inch wheels: 275/65R18
Exact numbers can vary by trim level and production date, so verify with the door placard or official documentation for your specific vehicle.
Upgrading sizes and clearance considerations
If you’re planning to run larger tires, you’ll need to account for suspension clearance, fender rubbing, and instrument accuracy. The ranges below are typical for a Tundra that has been outfitted with the appropriate wheels and, in some cases, a light lift.
- With modest lifting and 16- or 17-inch wheels: up to about 32x11.5R16 or 275/70R17
- With 18-inch wheels and a moderate lift: up to about 33x12.5R18 or 275/65R18
These ranges assume standard wheel widths and no major body alterations. Always perform a test fit and check for rubbing before driving regularly.
Other considerations
Fitment and vehicle systems
Changing tire size can affect speedometer accuracy, ABS/traction control calibrations, and load ratings. Aftermarket tires may alter braking feel and fuel economy. If in doubt, consult a tire shop or Toyota dealer with your VIN to confirm eligible sizes and any needed calibration.
Conclusion
For a 2010 Tundra, the most common stock sizes align with the wheel you have: 265/70R16 on 16-inch wheels and 275/65R18 on 18-inch wheels. Upgrading to larger diameters is doable with the right wheels, possible lift, and careful clearance checks, but always verify fitment against your specific truck’s hardware and use the door placard as the definitive guide.
Summary
Summary: Tire sizes on a 2010 Toyota Tundra depend on trim and wheel size. Typical stock options are 265/70R16 (16-inch wheels) and 275/65R18 (18-inch wheels). Larger sizes can be used with appropriate modifications, but clearance, calibration, and safety considerations require careful planning and a test fit. Always reference the door sticker and VIN/build data for your exact vehicle, and consult a professional if you’re unsure about fitment.
