What size tires go on a 1999 Chevy Silverado 1500?
The recommended tire size for a 1999 Chevy Silverado 1500 is P245/75R16. This size tire is the factory-installed option and provides the best fit and performance for this model year of the Silverado 1500 pickup truck.
Tire Size Specifications for a 1999 Chevy Silverado 1500
The 1999 Chevy Silverado 1500 was available with several different tire size options from the factory, but the most common and recommended size is P245/75R16. This tire size provides a good balance of ride comfort, handling, and load capacity for the Silverado 1500.
- Tire Width: 245 millimeters
- Aspect Ratio: 75 (the sidewall height is 75% of the tread width)
- Rim Diameter: 16 inches
Other tire sizes that may fit a 1999 Silverado 1500 include:
- P235/75R15
- P265/70R16
- LT245/75R16
However, the P245/75R16 size is the recommended and most common factory-installed tire for this model year of the Silverado 1500.
Factors to Consider When Choosing Tires
When selecting replacement tires for a 1999 Chevy Silverado 1500, there are several factors to consider beyond just the tire size:
- Load Rating: The tires need to have a sufficient load rating to support the weight of the vehicle and any cargo or towing.
- Speed Rating: Higher speed-rated tires are recommended for the Silverado 1500's performance capabilities.
- Tread Pattern: All-terrain or highway-terrain tires are common choices for the Silverado 1500 depending on the driving conditions.
- Tire Wear: Replacing tires in sets of four is recommended to ensure even wear and handling.
By selecting the right replacement tires that match the factory-recommended size and specifications, you can ensure your 1999 Chevy Silverado 1500 continues to perform at its best.
What size is the rear axle on a Chevy Silverado 1500?
9.76-inch rear axle. 3.42 axle ratio (gas engine), 3.73 axle ratio (diesel engine)
What is the best tire for a Silverado 1500?
Here are the best tires for The Chevy Silverado 1500: Goodyear Wrangler Fortitude HT. Michelin Defender LTX M/S. BFGoodrich All-Terrain T/A KO2.
What size tires are on a 1999 Chevy Silverado 1500?
1st Generation (GMT800) 1999–2006
| Configuration | Factory Tire Size(s) |
|---|---|
| C1500 Extended Cab | 235/75R16 245/70R16 245/70R17 |
| C1500 Regular Cab | 245/70R16 245/70R17 |
| K1500 Crew Cab | 265/70R17 |
| K1500 HD Crew Cab | 245/75R16 |
What size tires are on a Silverado 1500?
The current generation Silverado 1500 from 2019-2024 utilizes tires from 17 inches up to 22 inches, depending on the truck's trim level. The sizes available are largely unchanged from the previous generation of trucks.
What is the strongest Chevy rear end?
When the 12-bolt rearend is properly assembled, it's the strongest passenger-vehicle rearend Chevy ever produced. GM engineers designed the 12-bolt to be a durable piece that could handle the torque output of its big displacement engines.
How do you tell if you have a 7.5 or 8.8 rear end?
The edges of the seven point five are rounded the edges of the eight point eight are flat huh man until you see them side by side. They do look the same seven point five eight point eight.
What size rear end is in a 1999 Chevy Silverado?
We are proud to offer this remanufactured 8.6-inch Rear Differential for the 1999-2004 Chevrolet Silverado 1500 Truck with Two-Wheel Drive or Four-Wheel Drive. This rear diff is configured with a 3.73 or 4.10 gear ratio and an open differential, depending on the stock configuration of your Chevy 1500 Truck.
What size differential is a 2000 Chevy Silverado 1500?
With 8.625 Ring Gear. With 4.1 Gear Ratio.
What's the difference between a 10 bolt and a 12 bolt Chevy rear end?
I was ready. 12. Super easy two bolts at the bottom. 12 bolt say that he's one bolt. At the bottom 10 bolt two bolts in the bottom totals okay glance you know steadfast.
How do I tell what size my Chevy rear end is?
Identify your GMC or Chevrolet rear end gear ratio by the RPO Codes, usually located on the placard labeled “Service Parts Identification” inside the drivers door panel or glove box. Note that using the RPO code for parts identification assumes that the rear end has not been previously modified!!
