What size wiper blades for 1986 Toyota MR2?
The typical front-wiper blade lengths for the 1986 MR2 are 22 inches on the driver’s side and 18 inches on the passenger side. If the car in your market was equipped with a rear wiper, the rear blade is typically about 11 inches. Always verify with your owner's manual or a parts catalog to ensure a precise fit for your VIN.
The 1986 MR2 is a first-generation model (AW11) produced from 1984 through 1989. Wiper blade availability and sizes can vary by market and trim; the information below covers common sizes and how to confirm them before purchase.
Front wiper blade sizes for the 1986 MR2
The following sizes are widely reported for the AW11 MR2 from a range of catalogs and owner reports. Use this as a baseline and verify against your vehicle.
- Driver's side blade: 22 inches
- Passenger side blade: 18 inches
Concluding note: Replacing both blades with a 22-inch driver side and an 18-inch passenger side is a common and effective setup for this model under typical driving conditions.
How to verify you have the correct blades
To confirm the exact length for your car, measure the length of the blade along the edge, or remove the existing blade and check any markings on the blade itself or on the packaging. If you’re unsure, consult the owner's manual or a Toyota parts catalog by VIN.
Rear wiper blade considerations
Most North American MR2s from 1986 did not come with a rear wiper. If your car has a rear wiper (markets where it was offered), the blade is typically around 11 inches. Verify with the parts catalog for your specific market and VIN.
- Rear blade: about 11 inches
Conclusion: For most MR2s in the U.S. and Canada of that era, there was no rear wiper; if yours has one, ensure you replace it with an 11-inch blade or the size specified for your market.
Tips for replacement and fit
Choose a compatible blade type (frame style vs. newer frameless) and ensure the mounting style matches your wiper arms. If in doubt, use a parts-store compatibility tool by entering the year, make, and model, or bring the old blade for comparison.
Summary
For the 1986 Toyota MR2, plan on 22" driver-side and 18" passenger-side front wiper blades. The rear blade, if present, is usually around 11". Always verify with the owner's manual or a trusted parts catalog, as regional variations and trims can change blade lengths.
How much is a 1986 Toyota MR2 worth?
Typically, you can expect to pay around $12,000 for a 1986 Toyota MR2 Mk I in good condition with average spec.
What size windshield wipers for 1986 Toyota MR2?
18”
The 1 1986 Toyota MR2 Wiper Blade we have in stock is the Conventional 18” Wiper Blade: Factory Performance.
What size wiper blades for Toyota MR2?
Note: 20" Driver side wiper. Note: 19" Passenger side wiper.
What size windshield wipers for a 1991 Toyota MR2?
1991 Toyota MR2 Wiper Blades Size 20" Driver + 19" Passenger | Otto Wiper Blades.
