What spark plugs does a Dodge Caliber use?
The Dodge Caliber, a compact car produced by Chrysler from 2006 to 2012, uses standard spark plugs that are readily available and easy to replace. The specific spark plug type and size required for a Dodge Caliber can vary depending on the engine model and year of the vehicle.
Spark Plug Type and Size for Dodge Caliber
According to the information gathered from various automotive sources, the Dodge Caliber typically uses the following spark plug specifications:
- Spark Plug Type: Platinum or Iridium spark plugs
- Spark Plug Size: 14mm x 1.25 thread size
- Spark Plug Gap: 0.028 to 0.032 inches (0.7 to 0.8 mm)
It's important to note that the exact spark plug specifications may vary depending on the engine size and model year of the Dodge Caliber. Always refer to the owner's manual or consult with a professional mechanic to ensure you are using the correct spark plugs for your specific vehicle.
Replacing Spark Plugs in a Dodge Caliber
Replacing the spark plugs in a Dodge Caliber is a relatively straightforward process that can be done by most DIY mechanics. Here are the general steps to replace the spark plugs:
- Locate the spark plug access points, usually under the vehicle's hood
- Disconnect the spark plug wires from the old spark plugs
- Use a spark plug socket and ratchet to remove the old spark plugs
- Install the new spark plugs, ensuring they are tightened to the proper torque specification
- Reconnect the spark plug wires to the new spark plugs
- Start the engine and check for any misfiring or issues
It's recommended to replace all the spark plugs at the same time, as this ensures consistent performance and prevents any potential issues. Additionally, be sure to use the correct spark plug type and gap for your Dodge Caliber to ensure optimal engine performance and fuel efficiency.
What brand does Dodge use for spark plugs?
Mopar Spark Plugs are the original equipment choice for Chrysler, Dodge and Jeep® vehicles.
How many spark plugs are in a Dodge Caliber?
Dodge Caliber Spark Plug Comparison Chart
| Year | OE Metal | Amount Required |
|---|---|---|
| 2012 | Copper Copper | 4 4 |
| 2011 | Copper Copper | 4 4 |
| 2010 | Double Platinum Copper Double Platinum, Copper | 4 4 |
| 2009 | Double Platinum Copper Double Platinum, Copper | 4 4 |
How much does it cost to replace spark plugs in a Dodge Caliber?
The average cost for a Dodge Caliber Spark Plug Replacement is between $106 and $123.
How long do Dodge spark plugs last?
every 30,000 miles
For RAM, Dodge, and Jeep owners, knowing when to change spark plugs is essential. Generally, it's advised to replace spark plugs every 30,000 miles, although this can vary based on your vehicle's usage and model year.
Does it matter what brand of spark plugs you use?
The most important detail in a spark plug is matching your engine's design. Copper has high conductivity and low price, but also a shorter lifespan. Harder platinum and iridium cost more, but were designed to last longer, but remember, the best fit is always the one designed for your engine.
How do I know which spark plugs to use?
To find the recommended spark plugs for your vehicle or machine, check your owner's manual. If your owner's manual specifies iridium spark plugs, don't downgrade to platinum spark plugs or copper spark plugs; if you downgrade, you run the risk of poor engine performance.
What spark plugs are recommended for Dodge?
- Autolite XP Iridium Spark Plug XP5324. Customize.
- Autolite XP Iridium Spark Plug XP3924.
- Autolite XP Iridium Spark Plug XP5325.
- Autolite XP Iridium Spark Plug XP5224.
- Autolite XP Iridium Spark Plug XP6003.
- Autolite XP Iridium Spark Plug XP5263.
- Autolite XP Iridium Spark Plug XP5405.
- Autolite XP Iridium Spark Plug XP3923.
