What type of oil does a 2014 Acura MDX take?
The 2014 Acura MDX uses 0W-20 synthetic engine oil for its 3.5-liter V6 engine.
In more detail, the MDX’s engine benefits from a lightweight, fully synthetic oil to support cold starts, fuel efficiency, and long‑term protection. Acura specifies a 0W-20 viscosity as the standard, with API certification and compatibility with ILSAC GF-5 or later. Always verify the exact specification in your owner's manual or on the oil fill cap, since regional or production variations can occur.
Oil specifications for the 2014 MDX
Below is a concise reference to the oil requirements commonly cited for the 2014 MDX. Use this as a guide, and double‑check your manual for your exact vehicle.
- Viscosity: 0W-20
- Oil type: Full synthetic motor oil
- Capacity: Approximately 5 quarts (with filter)
- Certifications/specs: API SN or later; ILSAC GF-5 or later; compliant with Honda/Acura requirements
In summary, the MDX calls for 0W-20 synthetic oil, about 5 quarts with a new filter, and the oil should meet API SN or newer and ILSAC GF-5 or newer standards. Always confirm with the owner's manual for your specific vehicle and environment.
Maintenance considerations and tips
Oil-change intervals and best practices
Oil-change intervals for the 2014 MDX with synthetic 0W-20 are guided by the factory maintenance schedule. In typical driving conditions, changes are commonly recommended every 7,500 miles (12,000 kilometers) or per the manual, with shorter intervals under severe conditions. Use a reputable brand and the correct filter, and keep receipts for warranty and resale considerations.
When performing a DIY oil change, ensure you use the correct filter part, torque the drain plug properly, and dispose of used oil at an authorized collection facility. If you’re unsure, have the service performed by a qualified technician.
Summary
The 2014 Acura MDX requires 0W-20 synthetic motor oil, about 5 quarts with a filter, and the oil should comply with API SN or newer and ILSAC GF-5 or newer standards. Always verify the exact specification in your owner's manual, follow the recommended maintenance schedule, and use a reputable brand to ensure optimal engine performance and longevity.
