What type of oil goes in a Dodge Avenger?
The recommended oil type for a Dodge Avenger is 5W-20 or 5W-30 synthetic motor oil. This oil specification helps ensure proper lubrication and engine protection for the Avenger's engine.
Dodge Avenger Oil Recommendations
According to the Dodge Avenger owner's manual, the recommended oil viscosity grades for the Avenger are 5W-20 or 5W-30 synthetic motor oil. These oil grades are designed to provide optimal engine performance and protection in a variety of driving conditions.
The 5W-20 and 5W-30 designations refer to the oil's viscosity, or thickness, at different temperatures. The "5W" indicates the oil's cold weather performance, while the "20" or "30" refers to the oil's thickness at normal operating temperatures. Synthetic oils are recommended as they tend to maintain their viscosity better over time and provide improved engine protection compared to conventional mineral-based oils.
Why the Dodge Avenger Requires Specific Oil
The Dodge Avenger's engine is designed to work best with 5W-20 or 5W-30 synthetic motor oil. Using the wrong oil viscosity can lead to decreased fuel efficiency, increased engine wear, and potentially even engine damage over time. web>
- 5W-20 and 5W-30 oils have a lower viscosity, which helps reduce engine drag and improve fuel economy.
- Synthetic oils maintain their viscosity better in both hot and cold temperatures, providing improved lubrication and protection.
- The Avenger's engine components are engineered to work optimally with the recommended oil specifications.
It's important to always check your Dodge Avenger's owner's manual and use the specified oil type and viscosity grade to ensure proper engine performance and longevity.
What kind of oil does a 2010 Dodge Avenger take?
The 2010 Dodge Avenger uses 5W-20 motor oil for its 2.4L and 2.7L engines. However, for the 3.5L V6 engine, the recommended oil is 5W-30 in most conditions, with 10W-30 acceptable for temperatures above -18∘negative 18 raised to the composed with power−18∘C (0∘0 raised to the composed with power0∘F). Always confirm the correct type and viscosity for your specific engine by checking the owner's manual.
For the 2.4L and 2.7L engines
- Oil Type: 5W-20
- Oil Capacity: 4.5 quarts (for the 2.4L) or 5.5 quarts (for the 2.7L) with filter
For the 3.5L V6 engine
- Oil Type: 5W-30 is preferred for most temperatures. 10W-30 is acceptable for temperatures above -18∘negative 18 raised to the composed with power−18∘C (0∘0 raised to the composed with power0∘F)
- Oil Capacity: 5.5 quarts with filter
What kind of oil does a 2008 Dodge Avenger take?
The 2008 Dodge Avenger uses 5W-20 motor oil for its 2.4L and 2.7L engines and 10W-30 for its 3.5L engine. You should always check your owner's manual for the specific recommendation for your engine, but a full synthetic or high-mileage synthetic 5W-20 is a common choice for the 2.4L and 2.7L engines.
2008 Dodge Avenger oil types by engine:
- 2.4L (4-cylinder): SAE 5W-20
- 2.7L (6-cylinder): SAE 5W-20
- 3.5L (6-cylinder): SAE 10W-30
Other important considerations:
- Check your owner's manual: This is the most reliable source for the exact oil type and specifications for your vehicle.
- Synthetic vs. Conventional: While conventional oil is an option, a full synthetic or high-mileage synthetic oil is often recommended as it provides better protection and can allow for longer oil change intervals.
- Quantity: The 2.4L engine requires about 4.5 quarts with a filter change, and the 3.5L engine takes about 5.5 quarts with a filter change.
- Oil standards: Some oils, like those that meet the Chrysler MS-6395 specification, are recommended for Dodge engines.
What kind of oil does a 2014 Dodge Avenger take?
The recommended oil for a 2014 Dodge Avenger is SAE 5W-20. It is best to use a synthetic blend or full synthetic oil for improved engine protection, and it is important to check the owner's manual for specific recommendations or performance standards.
- Oil viscosity: Use SAE 5W-20 oil.
- Oil type: Full synthetic or synthetic blend oils are recommended for better protection and performance.
- Key benefits: Synthetic oils can provide better engine protection against wear, deposits, and sludge, especially at high temperatures and during cold starts.
What kind of oil do you put in a Dodge Avenger?
The recommended oil for a Dodge Avenger is typically 5W-20, especially for the 4-cylinder engine. Some models, like the 2010, might also use 5W-30. It is best to consult your owner's manual to confirm the specific type and weight, and always use an oil that meets the API SN or higher standards and is compatible with your engine, such as a full synthetic or synthetic blend.
Key details
- Viscosity: 5W-20 is commonly specified, but check your owner's manual, as some models may use 5W-30.
- Oil type: Full synthetic or a synthetic blend is recommended for best performance and protection, especially for high-mileage engines.
- Specifications: Look for oil that meets or exceeds API SN or higher standards, and specifically meets the Chrysler MS-6395 requirement.
- Oil filter: Always replace the oil filter with each oil change.
- Capacity: The 2.4L engine typically takes 4.5 quarts of oil with a filter change.
