What type of transmission fluid does a 1995 Ford Ranger take?
The 1995 Ford Ranger takes Mercon automatic transmission fluid. This is the recommended fluid for the Ranger's 5-speed manual or 4-speed automatic transmission.
Detailed Answer
The 1995 Ford Ranger was available with either a 5-speed manual transmission or a 4-speed automatic transmission. For both of these transmission types, the recommended fluid is Mercon automatic transmission fluid.
Mercon is a specification developed by Ford for automatic transmission fluids. It is designed to provide the proper lubrication, friction characteristics, and anti-wear properties required for Ford's transmissions. Using the correct Mercon fluid is important to ensure the transmission operates properly and lasts as long as possible.
Transmission Fluid Capacity
The 1995 Ford Ranger's transmission fluid capacity varies depending on the transmission type:
- 5-speed manual transmission: 2.4 quarts (2.3 liters)
- 4-speed automatic transmission: 9.5 quarts (9 liters)
It's important to check the transmission fluid level regularly and top it up if necessary, using the recommended Mercon fluid. Consult your owner's manual or a Ford service professional for the proper procedure.
Transmission Fluid Change Interval
Ford recommends changing the transmission fluid in a 1995 Ranger every 30,000 miles or 24 months, whichever comes first. This helps ensure the fluid maintains its lubricating and protective properties over time.
Proper maintenance of the transmission fluid is crucial for the long-term health and performance of the Ranger's transmission. Using the correct Mercon fluid and following the recommended change interval will help keep your 1995 Ford Ranger's transmission running smoothly.
What type of ATF does Ford use?
MERCON® transmission fluids undergo extensive testing, both in the lab and in real-world conditions, to ensure they provide optimum performance and durability. MERCON® fluids are the only fluids approved by Ford Motor Company for their recommended application.
What kind of transmission fluid does a 5R55E take?
MERCONt V
For 5R55E transmissions,use only MERCONt V (XT-5–QM). Use of other transmission fluid may result in transmission damage, malfunction or failure.
What transmission fluid does a 1996 Ford Ranger take?
AMSOIL Torque-Drive® 100% Synthetic Automatic Transmission Fluid.
What type of transmission fluid goes in a 1994 Ford Ranger?
Idemitsu – Type TLS Automatic Transmission Fluid, 1 qt (Part No. 30040093-75000C)
When did Ford switch to Mercon V?
1996 – MERCON V
In 1996, Ford released the Mercon "V" fluid specification (M2C202-B). Ford Technical Service Bulletin (TSB) 06-14-04 indicates that Mercon "V" is to replace the original Mercon fluid. This fluid was first used in the following transmissions: 1997 4R70W 4-speed automatic transmission.
What vehicles use 5R55S transmission?
The 5R55S, minus the SelectShift feature, was used in models of the Ford Mustang from 2005 until 2010. The 5R55W began use in November 2000 for the 3rd generation Ford Explorer and 2001 Ford Ranger.
What kind of transmission oil does a Ford Ranger take?
Capacities and Specifications
| Part | Recommended fluid | Specification |
|---|---|---|
| Engine oil - Diesel1 | SAE 5W-30 | WSS-M2C913-C WSS-M2C913-D |
| Engine oil - Diesel2 | SAE 5W-30 | WSS-M2C921-A WSS-M2C913-D |
| Engine oil - Diesel3 | SAE 0W-30 | WSS-M2C950-A |
| Transmission oil - Manual | Motorcraft® Dual Clutch Transmission Fluid | WSS-M2C200-D2 |
How many quarts of transmission fluid does a Ford Ranger take?
7 3/4 + quarts.
Can ATF 4 be used in Ford?
Mobil ATF+4 is not recommended for vehicles that require Ford Mercon® or General Motors Dexron® type fluids. Automatic transmissions should be checked for proper fluid levels at regular intervals, and the fluid should be changed at manufacturer-recommended intervals.
How much transmission fluid does a 95 Ford Ranger take?
Automatic Transmission Fluid
Capacity: 3 quarts Initial Fill.
