What type of transmission fluid does my 2013 Ford Fusion take?
The 2013 Ford Fusion takes Motorcraft MERCON LV automatic transmission fluid. This is the recommended transmission fluid for this vehicle model and year.
Detailed Explanation
The 2013 Ford Fusion is equipped with a 6-speed automatic transmission. Ford specifies that this transmission requires the use of Motorcraft MERCON LV fluid. MERCON LV is a type of automatic transmission fluid (ATF) that meets Ford's specific requirements for lubricating and protecting the internal components of the transmission.
Using the correct transmission fluid is important for the proper functioning and longevity of the transmission. Using the wrong fluid or failing to change the fluid at the recommended intervals can lead to premature wear, slipping, and even transmission failure. It's crucial to always refer to the owner's manual or contact a Ford dealer to determine the right transmission fluid for your 2013 Fusion.
Transmission Fluid Change Interval
Ford recommends changing the transmission fluid in a 2013 Fusion every 30,000 miles or 24 months, whichever comes first. This maintenance is important to ensure the transmission continues to operate smoothly and efficiently.
- Transmission fluid should be changed every 30,000 miles or 24 months
- Use only Motorcraft MERCON LV fluid, as specified by Ford
- Consult your owner's manual or a Ford dealer for the exact fluid capacity and change procedure
Properly maintaining the transmission fluid in your 2013 Ford Fusion is crucial for the long-term health and performance of this important component. Following Ford's recommended fluid type and change interval will help ensure your Fusion's transmission continues to function as intended.
What kind of transmission does a 2013 Ford Fusion have?
6F 6-Speed Automatic
Engines
| Year | Engine | Transmission |
|---|---|---|
| 2013–2016 | 2.0 Ecoboost Turbocharged I4 | (FWD) (6F 6-Speed Automatic) |
| (AWD) (6F 6-Speed Automatic) | ||
| 2017-2020 | (FWD) (6F 6-Speed Automatic) | |
| (AWD) (6F 6-Speed Automatic) |
Does it matter what transmission fluid I use?
So unless you're driving a car that's pushing 40, this isn't the type of ATF for you. Choosing the correct transmission fluid is critical to insuring the maximum performance and fuel economy from your car. Always check your owner's manual for the type of fluid recommended for your vehicle by the manufacturer.
What type of ATF does Ford use?
MERCON® transmission fluids undergo extensive testing, both in the lab and in real-world conditions, to ensure they provide optimum performance and durability. MERCON® fluids are the only fluids approved by Ford Motor Company for their recommended application.
Where is the transmission fluid dipstick on a 2013 Ford Focus?
there is a fill plug in the transmission it needs to be put up on a lift and lower engine shield removed then its filled through a plug in the transmission. this car does not have a dipstick or tube.
Does Ford Focus need transmission fluid change?
Ford Focus transmission fluid changes are extremely productive to keep your vehicle's transmission cordial and lubricated. If you don't routinely change your fluids at least every 30,000 miles or so, you may find that your Ford Focus transmission will slip.
What kind of transmission fluid does a Ford Fusion 2013 take?
Automatic Transmission Fluid
6 speed 6F35 Total Fill 9 quarts.
What kind of transmission is in the 2013 Ford Fusion?
A six-speed automatic with paddle shifters is mated to this engine, and this powertrain is the only one with available all-wheel drive. EPA fuel economy estimates range from 22/31 mpg city/highway for the AWD 2.0-liter EcoBoost model to 25/37 mpg for the 1.6-liter EcoBoost engine and manual transmission.
How much transmission fluid do I need for a Ford Focus 2013?
A 2013 Ford Focus transmission flush also uses about 10 quarts of fluid to specifically clean and flush out the system.
What kind of transmission fluid does a 2013 Ford take?
FRAM – Full Synthetic Dexron VI Automatic Transmission Fluid: 1 Quart (Part No. F426)
Can ATF 4 be used in Ford?
Mobil ATF+4 is not recommended for vehicles that require Ford Mercon® or General Motors Dexron® type fluids.
