What years did Dodge use the 8X6 5 bolt pattern?
The Dodge 8x6.0 inch five-lug pattern was not a common Dodge standard; it appeared on a limited number of older models and was not widely carried into modern production. If you’re trying to determine wheel compatibility, the exact year-by-year usage varied by model and market, so precise matches require model-specific verification.
In general, this pattern shows up only on a small subset of Dodge vehicles from the mid-century era. The pattern was not consistently used across the entire Dodge lineup, and the availability of this lug arrangement depended on the specific model year and body style. To determine a precise match, it’s best to consult the vehicle’s factory documentation or a reliable wheel-pattern database and, if possible, compare the lug pattern directly on the car.
Understanding the 8x6 5-Lug Pattern
The 8x6 designation is a shorthand used by enthusiasts to indicate a five-lug pattern where the lug holes sit on an approximately 8-inch circle. Because nomenclature can vary between sources, the exact geometry can differ slightly by year and production line. The critical, verifiable detail is that there are five lug holes arranged on a circular pattern roughly around 8 inches in diameter, which is what suppliers and pattern catalogs use to classify this Dodge-specific fitment.
Historical Usage Across Dodge Models
Because Dodge did not standardize this particular bolt pattern across its entire lineup, the 8x6 five-lug configuration is best described as an occasional fitment rather than a core specification. It appeared on a limited number of older Dodge models, primarily during the late 1950s through the early 1960s, with variation by model and export market. If you are restoring a specific vehicle, verify the exact year, model code, and body style to confirm compatibility.
How to Verify For Your Vehicle
To determine whether your Dodge uses the 8x6 pattern, follow these practical steps:
- Count the lug studs: there should be five.
- Measure the bolt circle diameter by measuring the distance between the centers of opposite lug holes; an approximately 8-inch circle indicates this pattern.
- Confirm the vehicle’s model year and body code, then cross-check with factory literature or a reputable wheel-pattern database.
If you’re sourcing wheels or adapters, a professional wheel shop can also verify fitment against your vehicle’s VIN and intended use to avoid mismatch.
Summary
The 8x6 five-lug Dodge pattern was not a universal, long-running specification. It occurred on a limited set of mid-century Dodge models, with variations depending on year and model. For accuracy, always verify by direct measurement and consult authoritative resources tied to your specific vehicle year and trim.
