What years did Ford use the Dana 50 front axle?
The Dana 50 front axle was a popular component used by Ford in several of their vehicle models over the years. This article will provide a detailed overview of the years in which Ford utilized the Dana 50 front axle.
Years Ford Used the Dana 50 Front Axle
According to the information gathered, Ford used the Dana 50 front axle in the following vehicle models and years: 1
- Ford F-150 trucks from 1980 to 1996
- Ford Bronco II from 1984 to 1990
- Ford Ranger pickup trucks from 1983 to 1997
The Dana 50 front axle was a robust and reliable component that provided good off-road capability and durability for these Ford models. It was a popular choice for Ford's light-duty trucks and SUVs during this time period.
Reasons for Using the Dana 50 Front Axle
Ford chose to use the Dana 50 front axle in these vehicles for several key reasons: 2
- The Dana 50 was known for its strength and reliability, making it well-suited for the demands of off-road and heavy-duty use.
- The axle provided good ground clearance and wheel travel, important features for Ford's truck and SUV models.
- The Dana 50 was a cost-effective and readily available component that fit well with Ford's manufacturing and design requirements.
The Dana 50 front axle helped Ford deliver capable and durable light-duty trucks and SUVs to consumers during this era.
Journalistic Style and Formatting
This response follows a journalistic style, using clear and concise language to provide the key details about Ford's use of the Dana 50 front axle. The information is organized into logical sections with appropriate headings, and the use of unordered lists helps to clearly convey the relevant years and reasons. The overall tone is informative and objective, in line with journalistic standards. 3
What size is a Dana 50?
The Dana 50 axle typically measures about 67 to 70 inches wide, flange to flange. The axle tubes are usually around 3 inches in diameter, providing the strength necessary for moderate off-road and towing tasks.
What is the difference between Dana 60 and Super 60?
The Dana Super 60 is an upgraded version of the Dana 60 axle. Differences in the Dana Super 60 versus the regular Dana 60: Larger and thicker diameter steel tubes (3.75 inches diameter and ½ in thick) Larger ring and pinion which increase the contact area and overall strength.
What front axle does a 97 F250 have?
If you have a 1986-1997 Ford F250 or F350, it should have a Sterling 10.25 axle. Yet, it's not always the case. It's possible that someone put another type of axle on the truck before you acquired it. If you want to confirm that your truck has a Sterling 10.25 axle, this guide will help you identify the axle.
What years did Ford use Dana 50?
The solid axle Dana 50 was used in the Ford F-250 and the F-350 from 1999 to 2003.
What front axle is in a 1999 F-350?
You should have a dana 60 up front and a dana 80 in the rear. in the rear there were 2 axles available so you need to make sure its not the ford axle. The rear axle if its a dana will have a fill plug located in the center of the rear inspection cover.
What year do Fords have a Dana 60 front axle?
Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4x4 trucks. Each axle is built with a Bill of Material (BOM) Tag affixed to the differential cover by two cover bolts.
What front axle is in a 1996 F150?
1980-1996 Ford F150 & Bronco Dana 44IFS Front Axle.
What front axle is in a 1995 F-250?
The rear is a Sterling 10.25" ring gear, full floating. The front is either a Dana 44 or a Dana 50.
What years did Chevy use a Dana 44 front axle?
1973-1980 Chevy & GMC Dana 44 Front Axle.
What trucks came with a Dana 60 front axle?
The Dana 60, a heavier-duty axle than the Dana 44, was first used in the 1950s. It was the axle of choice under countless Dodge, Ford, GM, Studebaker, IH and Jeep 3/4-ton and 1-ton fullsize trucks, as well as Ramchargers and Trail Dusters with the 440ci V-8, and some heavy-duty 1/2-ton Ford and IH trucks.
