Where can I find the part number on a fuel pump?
The part number on a fuel pump is typically located on the pump itself, often on a label or sticker. This information is crucial for identifying the correct replacement part when your fuel pump needs to be serviced or replaced.
Where to Find the Fuel Pump Part Number
To locate the part number on a fuel pump, follow these steps:
- Locate the fuel pump, which is usually situated in the fuel tank or near the engine.
- Inspect the pump for any labels, stickers, or engravings that may display the part number.
- The part number may be printed directly on the pump housing or on a label affixed to the pump.
- If the part number is not easily visible, you may need to remove the pump or access it from underneath the vehicle to get a better view.
Once you have identified the part number, you can use this information to order a replacement fuel pump or to verify that you have the correct part for your vehicle.
Importance of the Fuel Pump Part Number
The fuel pump part number is essential for ensuring that you purchase the correct replacement part for your vehicle. Using the wrong fuel pump can lead to a variety of issues, such as poor engine performance, fuel leaks, or even damage to the fuel system. By having the correct part number, you can be confident that the replacement pump will fit and function properly in your vehicle.
In addition to the part number, it's also important to note the make, model, and year of your vehicle, as well as any other relevant details, such as the engine size or trim level. This information can help you further narrow down the correct replacement part and ensure a proper fit.
What are the numbers on a pump?
The model number identifies the pump series or type, size, number of stages, and the standard materials of construction. Model numbers alone cannot identify whether the pump has any special or optional materials. Model numbers are often necessary to confirm the correctness of a serial number or item number.
How do I figure out what fuel pump I need?
As horsepower increases so does the volume of fuel required to support that power. A good estimator of volume to power is approximately 10 hp per gallon or 2.64 hp per liter. For example if your pump flows at 50 gph it should be able to support a 500 hp engine (50 x 10 = 500).
What are the numbers on the pump?
In the United States, unleaded fuel grades are defined by the “octane” rating. The octane rating, the number on the yellow sticker on the gas pump, is listed as the anti-knock index (AKI). The AKI is a measurement of how well the fuel resists detonation.
How to find pump model number?
Find your product number in 3 simple steps
- Step 1: Locate the nameplate. Start by finding the nameplate on your pump. Typically, this will be on the bottom or the side.
- Step 2: Examine the label. Take a thorough look at the label.
- Step 3: Find your product number. Look for your product number.
How do I find my serial number and model?
Serial Numbers are normally found on a label on the item but in some cases they are printed in the manual or a piece of paper that came with the item.
Is there a code for fuel pump?
The P0230 code indicates an issue with the fuel pump. This generic code indicates that there's an issue with the circuit between the fuel pump and the powertrain control module (PCM).
How do I find my pump serial number?
On the Back of Your Pump
The serial number (SN) is located on the back of your pump. If you are using the belt clip, you need to remove the belt clip to view the serial number. On the back of your pump, look for the letters "SN" (which stands for serial number).
How to identify a pump?
This is actually going to be on the bearing assembly. And not the volute.
Where is the part number on a fuel pump?
Luckily most pumps have a number stamped into the edge of the mounting flange as indicated. AC pumps may have 3,4,6, or 7 digits stamped in. AC-style pumps have 3 or 4. Carter pumps say “CAR-bure-TER” on the side of the main body (or have a spot where a re-builder ground this off) and a cast-in body part number.
How do I know what size pump?
The most important factors to consider when sizing a water pump come down to GPM/PSI ratings, inlet/outlet size for water and hoses, how high you'll need to pump the water (measured in vertical feet), referred to as total head lift, and how far you'll need to pump the water horizontally.
