Loading

Where is the amplifier in Lexus NX 200t?

The amplifier in the Lexus NX 200t is typically located in the rear cargo area, on the left side behind the trim panel. The exact position can vary by model year and audio system (standard Premium Audio vs. Mark Levinson).


Standard Premium Audio system location


For NX 200t models equipped with the base Premium Audio system, the power amplifier is mounted inside the left-hand cargo area behind the trim. It is usually tucked near the subwoofer enclosure and accessible after removing the left-side cargo trim panel.


To locate it, follow these steps:



  • Open the cargo area and remove the cargo cover or floor panel as needed to reveal the side walls.

  • Gently pry off the left-side cargo trim panel to expose the interior surface.

  • Look for a small rectangular black module with multiple wiring harnesses; this is the amplifier.

  • If you don’t see it, consult the owner’s manual or a Lexus service bulletin—the amplifier may be behind a different panel depending on year.


Accessing the amplifier typically requires removing a few trim fasteners and exercising care not to damage the panel or wiring. Once located, you can inspect connectors or disconnect power only after the battery is disconnected to avoid shorts.


Mark Levinson Premium Surround System


Vehicles with the optional Mark Levinson Premium Surround System include a higher-powered amplifier package. In many NX 200t builds, the ML amplifier remains in the trunk area but can be mounted on the opposite side or integrated into the subwoofer enclosure depending on the year and production batch. The ML system is larger and might be part of a single, centralized ML controller near the rear deck or side panel.


To locate the ML amplifier, follow similar steps as above but look for a larger module often labeled with Mark Levinson branding. If not visible, check the ML controller location diagram in the owner's manual or contact a Lexus technician.


Summary


In summary, the NX 200t’s amplifier is generally found in the rear cargo area on the left side behind trim for standard Premium Audio, with the Mark Levinson system potentially placing the amp elsewhere in the trunk or integrated with the ML components. Always consult the vehicle’s specific manual for precise locations and safety precautions when accessing electrical components.

How to reset lexus nx radio?


Here's how you do a factory reset on a new Lexus vehicle with the 14inch. Display. Press the settings icon towards the left scroll down until you see info and security tap on that.



Where is the factory amplifier located?


Separate amplifier unit: Common amplifier locations include under a front seat, behind the dashboard, or in the trunk. Look for a box or heat-sinked unit with a large wire harness. Door sill or interior badges: Look for branded plaques like “Bose” or “Harman Kardon” on speaker covers or interior trim.



Does the Lexus Nx 200t require premium gas?


Yes it needs premium IF you want all the power. If you were to put like 89 octane ecu will adjust timing to prevent knocking and it will reduce power.



How do I know if my vehicle has a factory amp?


Is or on the radio. Itself.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.