What is the torque on the caliper bolts on a 2012 Dodge Avenger?
The front brake caliper mounting bolts are typically torqued to about 75 ft-lbs (102 Nm). If your car has rear disc brakes (some trims with factory rear discs), the rear caliper mounting bolts are commonly torqued to about 25 ft-lbs (34 Nm). Always verify with the official factory service manual for your exact build, as brake configurations can vary by trim and production changes.
Understanding the brake setup on the 2012 Avenger
The 2012 Dodge Avenger generally uses disc brakes on the front wheels and, depending on the trim, may use rear discs or rear drums. Caliper bolts and related fasteners are crucial for safe braking performance. Because brake hardware can vary by model year and option package, the precise torque specification should be confirmed in the factory service manual (FCA/Chrysler) for your specific VIN and brake configuration.
Front caliper mounting bolts
The following information covers the standard front brake caliper mounting bolts for the 2012 Avenger. Use these as a guideline, but always double-check the exact spec in your manual or a dealer/service database for your exact vehicle.
Before the list, note that the list explains the typical steps to properly reinstall and torque the front caliper mounting bolts.
- Torque value: 102 Nm (75 ft-lbs) for the front caliper mounting bolts.
- Tools: A torque wrench capable of measuring in ft-lbs or Nm, and the correct socket size for the mounting bolts.
- Procedure basics: With the wheel removed, position the caliper over the brake rotor/bracket, align the caliper, and thread the mounting bolts by hand before torquing to specification.
- Recheck: After initial torque, re-check both bolts to ensure even clamping and no movement under light force, then proceed with road test checks as per safety guidelines.
Concluding the front-caliper bolt section: Following the correct torque ensures the caliper is securely fastened, minimizes rotor runout concerns, and preserves braking performance. Always replace any worn fasteners and consult the manual for whether threadlocker or lubricant is required on these bolts for your model.
Rear caliper mounting bolts (if rear discs are present)
If your 2012 Avenger is equipped with rear disc brakes, the rear caliper mounting bolts have a separate torque specification from the front. The following guidance covers typical rear-disc installations, but your exact spec should come from the service manual for your VIN.
- Torque value: approximately 34 Nm (25 ft-lbs) for the rear caliper mounting bolts.
- Tools: A torque wrench appropriate for the bolt size and a suitable socket.
- Procedure basics: Remove the rear wheel, support the caliper, remove the bolts, position the caliper, and torque to spec in a crisscross or manufacturer-recommended pattern.
- Recheck: After initial torque, ensure the caliper is properly seated and there is no binding in the slide pins or guides; perform a test brake after a short drive to confirm normal operation.
Concluding the rear-caliper bolt section: Correct rear caliper torque helps ensure even pad wear and reliable parking/braking performance. If your Avenger uses rear drums instead of discs, these bolts and this torque do not apply to the rear brakes.
What to do if you’re unsure
If you don’t have the factory service manual on hand, contact a Dodge dealership or a trusted automotive shop to confirm the exact torque for your specific build. Vehicle year, trim, and regional production changes can affect brake hardware specifications. When in doubt, err on the side of referencing the official documentation or a certified technician.
Summary
For a 2012 Dodge Avenger with front discs, torque the front caliper mounting bolts to about 102 Nm (75 ft-lbs). If rear discs are present, torque the rear caliper mounting bolts to about 34 Nm (25 ft-lbs). Rear drum configurations do not use rear caliper bolts. Always verify the precise spec in your factory service manual for your VIN and brake configuration, and use proper torque procedures to ensure safe braking performance.
What is the torque spec for the brake calipers on a 2014 Dodge Avenger?
The caliper bracket bolts have a torque specification of 80 ft/lbs. The rear brakes use a single piston caliper mounted on two guide pins that have a torque spec of 32 ft/lbs. Like the front, the upper pin has a special sleeve designed to eliminate noise.
What is the torque on brake caliper mounting bolts?
between 80 to 100 ft-lbs
The typical torque range for caliper bracket bolts is between 80 to 100 ft-lbs (108 to 135 Nm). However, it's important to consult your vehicle's service manual for the exact specification.
How much torque does a Dodge Avenger have?
A DOHC 16-valve 2.0 L I4 engine (140 hp (104 kW; 142 PS) and 130 lb⋅ft (176 N⋅m) of torque) is standard.
What is the torque spec for the brake calipers on a 2012 Dodge Charger?
The caliper bolts have a torque spec of 44 ft/lbs and 23 ft/lbs in the rear. Pressure bleeding is highly recommended to bleed this brake system to ensure all air is removed from the system.
