Where is the engine code on a 2.0 TDCi?
The engine code for a 2.0 TDCi is usually stamped on the engine block or shown on a metal plate attached to the timing cover. In most Ford Duratorq 2.0 TDCi installations, you’ll find the code in a few standard spots under the hood; if you can’t locate it there, use the vehicle’s VIN or service documentation to confirm the exact variant.
Common physical locations on the engine
Locating the code often starts with the most accessible spots under the hood. While exact placement can vary by model and year, these are the typical areas to inspect first.
- On the timing belt/chain cover (front of the engine): a stamped or printed metal tag or engraving with the engine code.
- On the rocker cover or near the oil filler cap: some versions have the code molded or labeled here.
- On the engine block near the bellhousing or injection pump area: a stamped code may appear along the side of the block.
- On a small data plate attached to the engine (near the coolant reservoir or starter): a plate or sticker may list the engine code, displacement, and serial information.
Concluding paragraph: If none of these spots reveal the code, a dealer or qualified mechanic can identify it from the VIN or by inspecting the engine with documentation in hand.
How to confirm the exact engine code for your vehicle
To verify the precise engine code, use a combination of on-vehicle clues and official records. The code identifies the exact engine variant and is essential for parts and service compatibility.
- Step 1: Locate the vehicle Identification Number (VIN) and use Ford’s official VIN decoder or a reputable automotive database to reveal the engine code linked to your car.
- Step 2: Check the vehicle’s service book or owner’s manual for a “Power unit” or “Engine” code that matches your model.
- Step 3: Inspect under the hood for a data plate or stamping on the timing cover or engine block; photograph the markings for reference.
- Step 4: If in doubt, contact a Ford dealer with the VIN to confirm the exact engine variant and code.
Concluding paragraph: Using multiple sources (VIN, manuals, and physical markings) provides the most reliable confirmation of the engine code.
Notes on variations by model and year
The Duratorq 2.0 TDCi family has evolved across markets and generations, so engine code prefixes and formats can vary (for example, different codes may be used for European versus other markets). Because of these variations, relying on the VIN and official documentation is the safest way to identify the correct engine variant and ensure you order the right parts.
Summary
In short, you’ll typically find the engine code on the front of the engine block near the timing cover, on the rocker cover, or on a small data plate attached to the engine. If you can’t locate it visually, use the VIN to pull the exact engine variant from Ford’s resources or ask a dealer to confirm. Keeping a record of the engine code helps with parts compatibility and accurate servicing.
Where is the engine code on a 2.0 TDI?
The engine code is found on the driver's side front on the engine block. You may also find the engine code on a sticker attached to the cylinder head. However, over time the numbers become very hard to read.
How to find TDI engine code?
Your engine code. If you don't have your owner's manual. Then the most surefire place to find your engine code is going to be in your trunk. Under the carpet.
Where is the engine code located?
Unfortunately, no industry standard exists for ESN location, so OEMs place their engine identification plates in a variety of locations. Look on the top of the valve cover, front, back or either side of the engine block.
Where is the engine code on a Ford 2.0 TDCi?
Engine number - 2.0L Duratorq-TDCi (DW) Diesel/2.2L Duratorq-TDCi (DW) Diesel. The engine number is stamped on the engine block next to the oil filter and the oil cooler.
