How much oil does a 2012 Ford Flex 3.7 take?
The 2012 Ford Flex 3.7 takes 6 quarts of 5W-20 engine oil. This is the recommended oil capacity and type for this specific model year and engine configuration.
Detailed Information on the 2012 Ford Flex 3.7 Oil Capacity
The 2012 Ford Flex is a midsize crossover SUV that was available with a 3.7-liter V6 engine. This engine has a recommended oil capacity of 6 quarts, and the automaker specifies the use of 5W-20 motor oil.
The oil capacity can vary slightly depending on factors like whether the vehicle has a full-size spare tire or not, but in general, 6 quarts is the standard amount needed to fill the engine on a 2012 Ford Flex 3.7 model.
Why the 5W-20 Oil Specification?
Ford recommends 5W-20 engine oil for the 3.7-liter V6 in the 2012 Flex for a few key reasons:
- Improved Fuel Economy: 5W-20 is a thinner, more lightweight oil that can help improve the Flex's overall fuel efficiency compared to heavier 5W-30 or 10W-30 oils.
- Engine Protection: The 5W-20 viscosity provides adequate lubrication and wear protection for the engine components, even in cold weather conditions.
- Manufacturer Recommendation: Ford engineers have extensively tested and validated the 5W-20 oil specification as the optimal choice for this engine design and application.
Using the recommended 5W-20 oil in the proper 6-quart quantity is important for maintaining the 2012 Ford Flex 3.7's engine performance and longevity.
How many quarts of oil does a Ford Flex hold?
The Ford Flex oil capacity is generally 6 quarts of oil for the 3.5L non-turbo engine, but it can vary slightly depending on the year and if it's a turbo model. For the turbo model, the capacity is 5.7 liters, which is about 6.0 quarts. It's best to always check your owner's manual for the most accurate information for your specific vehicle.
- 3.5L non-turbo engine: 6 quarts (with filter)
- 3.5L turbo engine: 5.7 liters (approximately 6 quarts) with filter
- For all models: Always confirm the exact capacity in your owner's manual.
How many quarts of oil does a 2012 Ford Flex take?
The 2012 Ford Flex with a 3.5L V6 engine has an oil capacity of 5.5 quarts (5.2 liters) when changing the oil and filter, though some sources recommend a full 6 quarts (5.7 liters) for the Ecoboost engine. Always use the correct type and amount of oil and then check the dipstick to ensure the correct level is reached after refilling.
Oil capacity by engine
- 3.5L V6 (standard and Ecoboost): 5.5 to 6 quarts (5.2 to 5.7 liters), depending on the source and specific engine.
- Always check the dipstick: After adding the oil, run the engine briefly, then check the dipstick to ensure the level is between the "min" and "max" marks. You may need to add a small amount more to reach the correct level.
Other considerations
- Oil type: Use the viscosity recommended in your owner's manual, which is typically 5W-30 for most models.
- Filter: It is recommended to replace the oil filter with every oil change.
- Consult your manual: For the most accurate information for your specific vehicle, consult your owner's manual.
How many quarts of oil does a Ford 3.7 V6 take?
The Ford 3.7L engine oil capacity is 6 quarts (5.7 liters) with a filter change for most applications like the F-150 and Edge. Always use a 5W-20 viscosity oil for this engine, unless your owner's manual specifies otherwise.
- Oil capacity: 6 quarts (5.7 L)
- Oil type: SAE 5W-20
- Filter: Always include the filter in the capacity.
- After refill: Check the oil level with the dipstick and add more if needed.
What kind of oil does a 2012 Ford Flex Ecoboost take?
STP Full Synthetic Engine Oil 5W-30 5 Quart.
