Where is the indicator relay on a 2009 Ford Transit Connect?
In a 2009 Ford Transit Connect, the turn signal indicator relay is typically located in the vehicle's fuse/relay boxes. Most models use a dedicated flasher relay in one of the fuse boxes, but some early/variant builds rely on a centralized flasher function inside the Body Control Module (BCM), which means there may not be a separate, replaceable relay accessible to the owner.
Where to look for the indicator relay
The following locations are the most common places to find the indicator (flasher) relay on a 2009 Transit Connect. Use the fuse box diagrams on the covers to confirm exact labeling.
- Engine compartment fuse/relay box: typically located in the engine bay, with a lid diagram showing relays labeled “Flasher,” “Turn Signal,” or “Indicator.”
- Driver’s side interior fuse box (kick panel or under-dash): another common spot where a dedicated turn-signal/flash relay may be placed.
- Body Control Module (BCM) area: on some builds, the indicator function is integrated into the BCM, meaning there is no separate flasher relay to replace. If no relay is listed in the fuse boxes, this is likely the case.
Regardless of location, always refer to the fuse/relay box cover and the owner’s manual diagram for your exact vehicle’s layout, as production changes can shift component placement between trims and markets.
How to confirm the correct relay
Before handling electrical relays, ensure the ignition is off and you follow basic safety precautions. Use these steps to identify the correct relay:
- Locate the fuse/relay box(es) using the vehicle’s diagram on the cover or the service manual.
- Look for a relay labeled “Flasher,” “Turn Signal,” or “Indicator” in the engine bay box first; if not found, check the interior fuse box.
- If a separate relay is present, you can test it by swapping it with another identical relay from the same box (with the ignition off) to see if the indicator function changes as expected.
- If there is no separate relay and the turn signals still fail to flash, the system may be controlled by the BCM, which generally requires professional diagnosis and possible BCM replacement or software/firmware checks.
Note: Use OEM or equivalent relays with the same amperage rating. If you’re unsure which component is responsible for your specific build, consult a Ford dealer or a qualified automotive technician for confirmation and safe testing procedures.
Notes for repairs and considerations
Repair paths differ depending on whether a discrete relay exists or the BCM handles the function. Replacing a fuse or a bare relay is only appropriate when the diagram clearly shows a separate component. If no relay is listed, do not force a replacement; contact a professional to avoid damage to the electrical system.
Summary
For a 2009 Ford Transit Connect, start by checking the engine compartment fuse/relay box for a relay labeled Flasher or Turn Signal. If nothing is labeled there, inspect the interior fuse box next. If no discrete relay is present, the flasher function may be integrated into the Body Control Module, requiring professional assessment. Always refer to the vehicle’s fuse box diagram and owner’s manual for the exact location on your specific model.
