Where is the locking wheel nut code on a Honda?
The locking wheel nut code is usually stored with the wheel lock key or the spare tire kit, often in the trunk or glove box. This code is what you need to remove the locking lug nuts when you change a tire.
Placement can vary by model and year, so start with Honda’s standard storage points for the wheel-lock setup. If you can’t locate it, there are reliable steps to retrieve or replace it through official channels.
Where to look for the wheel lock code
The wheel lock code is typically grouped with the wheel lock key and spare-tire tools and is sometimes printed on a small card or label inside the toolkit. Check these common spots:
- Trunk floor area: Lift the trunk floor mat to reveal the tool kit; the wheel lock key is usually stored with the jack and lug wrench, and the code card may accompany it.
- Spare tire well: If your Honda has a dedicated space for the spare or inflator kit, inspect the storage bag or pocket for a wheel lock key and code card.
- Toolkit pouch or holder: Some models place the wheel lock key in a dedicated plastic holder within the toolkit assembly.
- Glove box or owner's manual packet: In some trims, a small card labeled "Wheel Nut Code" or similar may be tucked with your owner's manual or warranty booklet.
By locating the wheel lock key and its accompanying code card or label, you can match the pattern to the correct lug nut recess and safely remove the wheel.
What to do if you can't locate the code
If the code card or key cannot be found in the usual places, take these steps:
Dealer-assisted replacement
- Check the vehicle documentation: Look for any "Wheel Lock" or "Lug Nut" section in the owner's manual or the service booklet; sometimes the code is noted there.
- Contact a Honda dealer: Provide the VIN and proof of ownership; the dealer can issue a replacement wheel lock key or provide the code. There is typically a service fee.
- Visit a licensed tire shop or locksmith: They can remove a wheel lock without the code using specialized tools, but you may still need to verify ownership and have the correct key or code from the dealer.
Avoid forcing or drilling out a wheel lock without the proper key or code, as this can damage the wheel, studs, or rims and may affect warranties. Rely on official channels to obtain the correct key or code.
Summary
For Honda vehicles, the locking wheel nut code is generally kept with the wheel lock key or spare tire kit, commonly found in the trunk or glove box. If you can’t locate it, consult the owner's manual, contact a Honda dealer with your VIN, or visit a licensed tire shop to obtain a replacement key or code. Keeping the code with your vehicle documentation helps prevent tire service delays in the future.
Do all Hondas have the same wheel lock key?
They have a master key set with all 10 or 12 variants for that size Honda lug nut that they can use to get it off. If you order a new wheel lock set you will get a random one. There's a 1 in 10 or 12 chance that you happen to get the same one.
How to find a Honda key code?
The key code number is stamped on the metal plate attached to the key ring. For vehicle security: Record the key code number. Keep the key code number plate in a safe place, NOT IN THE VEHICLE.
Where can I find my locking wheel nut key code?
Common places are: The glove box. Under or with your spare wheel – it may be in a separate compartment.
Where is my Honda wheel lock key?
Key this is what you're going to insert. Into the lug wrench. And then it's going to go onto. The wheel lock. Right here. Get it on there for you and as you can see that fits on there snugly.
