What type of oil does an Acura MDX take?
Most modern Acura MDX models require 0W-20 full-synthetic motor oil. Some older MDX generations used different viscosities, so always check your owner's manual or the oil fill cap for the exact specification for your year and engine.
Oil specification by generation
The following guide highlights the typical recommendations, but year-to-year variations exist. Climate and driving conditions can also affect the recommended viscosity.
- 0W-20 full-synthetic oil is standard for most MDX models produced in recent years (roughly from the mid-2010s to present).
- Earlier MDX generations had variable requirements, commonly 5W-20 or 5W-30, depending on the engine and market. Confirm the exact viscosity for your vehicle.
- Oil capacity for a standard MDX V6 with filter is about 5.7 quarts; top-offs and oil changes should use the same viscosity and specification.
- Use an oil that meets API SN or newer and ILSAC GF-5 or GF-6 standards, with Acura-approved full-synthetic formulations recommended by the owner's manual.
When in doubt, rely on the official guidance for your exact model year to ensure proper lubrication and warranty compliance.
How to verify the correct oil for your MDX
To confirm the precise oil specification for your vehicle, follow these steps:
- Consult the owner's manual, section on engine oil, for the recommended viscosity and specification.
- Check the oil fill cap on the engine; it often lists the viscosity (for example, "0W-20").
- Look for a label under the hood or in the service booklet that states the required oil type.
- Ask an Acura dealer or technician if you have VIN-specific requirements or special climate considerations.
Using the exact recommended viscosity and meeting the stated standards helps protect the engine and maintain warranty coverage.
Summary
In short, the MDX’s default for recent generations is 0W-20 full-synthetic oil, with older models requiring a different viscosity. Always verify the exact specification for your year and engine by consulting the owner's manual or the oil cap, and use a quality full-synthetic oil that meets API/SN or newer and ILSAC GF standards. Regular oil changes with the correct oil help preserve engine longevity and performance.
What kind of oil does a 2011 Acura MDX take?
The recommended oil for a 2011 Acura MDX is 5W-20. While some sources may suggest other viscosities for specific situations or for later model years, the owner's manual and various auto parts and maintenance sites confirm 5W-20 is the correct type for your vehicle. You can use either a full synthetic or a synthetic blend, as long as it is API certified and meets the 5W-20 viscosity requirement.
Key details for your 2011 Acura MDX
- Recommended oil: 5W-20
- Capacity: 4.5 quarts with a filter change
- Oil type: You can use a full synthetic or a synthetic blend
- Certification: Ensure the oil is API certified
Can I use 5w30 instead of 5w20 in my Acura?
Everywhere else in the world besides the US, depending on climate, Acura/Honda suggests different viscosities in our J32/J35 engines, ranging from 5w20-10w40. These engines were designed to run on 5w30. You aren't going to hurt anything. Especially if you live somewhere hot.
What oil does the Acura MDX use?
Most Acura MDX models use 0W-20 full synthetic oil (for model years after 2011), while older models (before 2011) typically use 5W-20 oil. It is best to always consult your owner's manual for the specific recommendation for your model year and consider using full synthetic oil for its benefits.
Recommended oil types
- For models after 2011: Use 0W-20 full synthetic oil. This is the most common recommendation for newer MDX models.
- For models before 2011: Use 5W-20 oil, which is available in both full synthetic and synthetic blend options.
- For specific models: For example, a 2010 MDX recommends 5W-20, and a 2019 MDX recommends 0W-20.
What to check before buying oil
- Owner's manual: Always consult your owner's manual to confirm the exact oil type and viscosity for your specific model year.
- Synthetic vs. Conventional: Newer models require synthetic oil, while older models may use conventional oil. Synthetic oils offer superior protection, longer life, and better performance in extreme temperatures.
How much oil does a 3.0 L 6 cylinder take?
A 3.0L V6 engine typically takes between 4.5 and 6.5 quarts of oil, but the exact amount depends on the specific vehicle make and model. For example, a 2006 Ford Fusion 3.0L V6 requires 6 quarts, while a 2001 Jaguar S-Type 3.0L V6 needs 6.5 quarts. Always check your vehicle's owner's manual for the precise capacity and oil viscosity requirements.
| Vehicle | Oil Capacity |
|---|---|
| 2012 Ford Escape 3.0L V6 | 6 quarts |
| 2006 Ford Fusion 3.0L V6 | 6 quarts |
| 2003 Ford Ranger 3.0L V6 | 4.5 quarts |
| 2001 Jaguar S-Type 3.0L V6 | 6.5 quarts |
(this||self).Wufxzb=function(c,e,f,l,k){var d=document.getElementById(c);if(d&&(d.offsetWidth!==0||d.offsetHeight!==0)){c=d.querySelector("div");var g=c.scrollWidth-c.offsetWidth,h=Math.min(e?g:0,g);c.scrollLeft=e&&(l||f)?0:h;var a=d.getElementsByTagName("g-left-button")[0],b=d.getElementsByTagName("g-right-button")[0];a&&b&&(e=RegExp("\\btHT0l\\b"),f=RegExp("\\bpQXcHc\\b"),a.className=a.className.replace(e,""),b.className=b.className.replace(e,""),h===0?a.className="pQXcHc "+a.className:(a.className=
a.className.replace(f,""),k&&c.classList.add("pA30Ne")),h===g?b.className="pQXcHc "+b.className:(b.className=b.className.replace(f,""),k&&c.classList.add("FpCCub")),setTimeout(function(){a.className+=" tHT0l";b.className+=" tHT0l"},50))}};}).call(this);(function(){var id='_MOklafylHP-ji-gP2uCyqQc_204';var rtl=false;var gecko=false;var edge=false;var soh=false;
(this||self).Wufxzb(id,rtl,gecko,edge,soh);})();
