Where is the OBD port on a 2017 Subaru?
The OBD-II diagnostic port in a 2017 Subaru is located under the driver's side dashboard, to the left of the steering column, tucked behind a small access panel in the footwell.
Location overview and accessibility
In most 2017 Subaru models (Outback, Forester, Legacy, Impreza, Crosstrek, and WRX), the OBD port sits on the lower part of the dashboard on the driver's side. The exact cover may vary by trim, but the port is typically accessible from the driver's seat and hidden behind a small trim panel or fuse-box cover.
Model-specific notes
Subaru models from that year share a common OBD location across trims, though some variants may place the panel a bit differently or require removing part of the knee bolster to reach the port.
Use these steps to locate and access the OBD port quickly:
- Inspect the lower dash on the driver's side, just to the left of the steering column near the knee area.
- Look for a small removable panel or cover that may be labeled or resemble a fuse-box door.
- Remove the cover to reveal the 16-pin OBD-II socket.
With the cover removed and the port visible, you can plug in an OBD-II scanner or code reader. Ensure you follow your tool’s instructions and the vehicle’s safety guidelines, typically with the ignition in the proper position before connecting.
Summary
For a 2017 Subaru, the OBD port is typically located under the driver’s side dash, to the left of the steering column, behind a small access panel in the footwell. This location is generally consistent across Subaru models from that year, with minor variations by trim. Access is straightforward by removing the small cover and connecting your scanner as directed.
