Where is the OBD port on a Subaru Outback 2024?

The OBD-II diagnostic port on the 2024 Subaru Outback is located in the driver’s footwell, under the dash to the left of the steering column. It sits behind a small panel and is accessible for connecting a scan tool or code reader.

Location and how to access it

In the 2024 Outback, Subaru places the standard OBD-II port in the driver’s side interior, near the left knee area. The access point is usually a small removable cover or panel under the dash, close to the hood release lever. To reach it, pop out the cover with your fingers or a small flat tool and expose the 16-pin diagnostic connector.

Before you begin with any diagnostic device, use this quick guide to locate and reveal the port:

• Sit in the driver’s seat and position yourself so you can see under the dash to the left of the steering column.


• Look for a small rectangular panel or cover in the footwell area, near the hood release lever.


• Remove the panel or cover to reveal the OBD-II connector.


• Identify the 16-pin DLC connector, which is the standard OBD-II port.


• Attach your scan tool or code reader to the connector.

With the cover removed, you can access the diagnostic port quickly for reading codes or performing diagnostics. The port is designed to be tucked away but easily reachable for authorized maintenance and monitoring.

What you can use the OBD port for

The OBD-II port enables connection to a wide range of diagnostic functions, from basic code reading to real-time data monitoring. Here are common uses for an Outback owner or technician.

• Retrieve and clear diagnostic trouble codes (DTCs) with a compatible scanner.


• Check emissions readiness and monitor the status of readiness monitors.


• View live engine data such as RPM, coolant temperature, vehicle speed, and sensor values.


• Perform basic troubleshooting or monitor performance during repairs or maintenance.

These capabilities help you diagnose issues, ensure emissions compliance, and verify that repairs have resolved the underlying problem.

Port appearance and quick tips

The OBD-II port on the 2024 Outback is a standard 16-pin DLC connector. It is usually black or dark gray and sits behind a small, removable dash panel. Tip: keep the cover or panel in place when not in use to prevent debris from entering the dash cavity, and ensure the vehicle is in a safe state before connecting or disconnecting any diagnostic tool.

Summary

For the 2024 Subaru Outback, the OBD-II port is located in the driver’s footwell under the dash, to the left of the steering column, behind a small removable panel. Access is straightforward by popping off the cover and connecting a standard 16-pin OBD-II scanner. This placement aligns with the vehicle’s interior layout and the universal OBD-II standard, enabling diagnostics, readiness checks, and live data monitoring.

Where is the Subaru Outback OBD port?

And if you look kind of like where your left foot would be if you're sitting in the driver's. Seat. You should see this white port right here. This is that OBD2 port you plug.

Where is the OBD on a 2014 Subaru?

So you'll be able to open up your driver's. Door get down in here. And right down here at the bottom. This is right there where your left foot would be you can sit it on. There.

Where is the OBD on a Subaru Outback 2024?

Located under the right side of the driver's side lower dash.

Where is the code reader on a Subaru?

The Subaru code reader (OBD-II port) is located under the driver's side of the dashboard, usually near the steering column or left knee area. To find it, look under the dash on the left side, and you may need to bend down to see it.
 
This video shows the OBD-II port location in a Subaru Impreza: 44sYOUCANICYouTube · Jul 17, 2023

• Location: Under the dashboard on the driver's side. 
• Position: Near where your left foot would be, often tucked up near the firewall. 
• How to access: You'll likely need to get on the floor and look up under the dash. 
• What to look for: A white or grey connector, which is the OBD-II port, where you will plug in your code reader. 

This video shows the OBD-II port location in a Subaru Outback: 44sClay AutoYouTube · Jun 24, 2025