Where is the part number on a steering gear box?
The part number on a steering gear box is typically located on a metal tag or label affixed to the exterior of the gear box housing. This part number is a unique identifier that can be used to order replacement parts or look up specific details about the gear box's make, model, and specifications.
Locating the Part Number
To find the part number on a steering gear box, follow these steps:
- Visually inspect the exterior of the gear box, looking for a metal tag or label that contains text or numbers.
- The part number is usually printed in a prominent location, such as the side or top of the gear box housing.
- The part number may be preceded by "P/N," "Part No.," or a similar abbreviation.
- If you cannot locate the part number, check the manufacturer's documentation or contact the gear box supplier for assistance.
Knowing the part number is important when ordering replacement parts or accessing technical information about your steering gear box.
Understanding Gear Box Part Numbers
Gear box part numbers typically consist of a combination of letters and numbers that provide specific details about the component. The part number may indicate the gear box's:
- Make and model
- Size or capacity
- Manufacturing date or revision level
- Other unique identifying characteristics
By referencing the part number, you can ensure that you order the correct replacement part for your specific steering gear box.
Importance of the Part Number
The part number on a steering gear box is a critical piece of information for several reasons:
- Replacement Parts: The part number is required when ordering replacement components, such as seals, bearings, or the gear box itself.
- Technical Information: The part number can be used to look up detailed specifications, installation instructions, and other technical details about the gear box.
- Warranty and Recalls: The part number may be needed to verify the gear box's warranty status or to determine if it is subject to any manufacturer recalls.
Keeping track of the part number and referring to it when necessary can help ensure the proper maintenance and repair of your vehicle's steering gear box.
What is steering number?
What is a steric number? Steric Number is the total number of atoms directly bonded to a central metal atom and the number of lone pairs attached. Steric Number plays an essential role in VSEPR (Valence Shell Electron Pair Repulsion) theory in assessing the molecular geometry.
Where is the power steering module located?
Also, be aware that most power steering control modules will likely be mounted on or near the steering column or the steering gear.
Can you drive with a bad steering gearbox?
It's not a good idea to keep driving with a faulty steering gear, even if you can compensate for the various steering problems it may cause. You can cause long-term damage to the steering gear and the power steering pump, especially if the power steering also has a fluid leak.
Where is the part number on a steering cable?
The cable part number and length can usually be found about 2 feet from one end of the cable, stamped into the plastic conduit (exterior jacket or casing).
What is the difference between the Saginaw 800 and 808?
The difference between the Saginaw 800 and the Saginaw 808 is the size of the piston. The 800 has a 70mm piston and the 808 has an 80mm piston. This is easy to measure from the outside of the gearbox. If you measure the end cap, the 800 is roughly 3" and the 808 is just under 3.5".
How do you find the center of a steering gear box?
So my box was about four and a quarter. So I need to go about two. And 1/8 turns. So with this puppy right here we're gonna go. One.
What is the HS code for steering gear box?
87089400
Where is the part number on a power steering gear box?
A serial number and part number are engraved into the steering gear housing.
How much does it cost to replace a steering gearbox?
A power steering gearbox replacement can cost anywhere between $200 and $900 depending on several factors like the brand and operation type. Labor costs to install the gearbox are usually between $160 and $200. These figures may vary depending on your specific make and model as well as the rates in your area.
Is it worth fixing a gearbox?
In short, if the cost to replace the gearbox isn't too hefty, and the car is in reasonable condition and age, it's probably worth fixing your gearbox.
