Where is the TPMS button on a Ford?

There isn’t a single universal TPMS button on Ford vehicles; the location depends on the model and year. In many newer Fords, there isn’t a dedicated reset button at all—the system is often reset via the instrument cluster or the infotainment system after ensuring tires are correctly inflated.

Where to look for a physical TPMS button

Some Ford models still include a small physical TPMS or Reset button in a few common spots. Check these areas first:

• Left side of the dashboard near the steering column, sometimes tucked behind a panel or integrated with the headlight switch.


• Inside or on the edge of the glove box.


• In the center console storage area or under the armrest lid.

If your model doesn’t have a dedicated button, TPMS management is typically done through the vehicle’s settings menu.

Resetting TPMS on Ford: methods

Most Ford models either use a dedicated physical button or a digital reset in the driver information display or touchscreen. Here are the common paths you’ll encounter:

• If your model has a TPMS/RESET button: Turn the ignition to ON (engine off), press and hold the button until the TPMS light blinks or a confirmation message appears, then release. Drive at a steady speed to relearn the system as instructed in the manual.


• If the model uses the instrument cluster or infotainment menu: With the ignition ON, navigate to Settings > Vehicle > TPMS or Tire Pressure > Reset (or Learn); select Reset or Learn, inflate tires to the recommended pressures, then drive as directed to complete the relearn.

In either case, after performing the reset, the TPMS light should go out once the system completes its relearn sequence. If it remains on, there may be a tire leak, sensor issue, or other fault requiring service.

Model-specific notes

Because Ford’s interfaces and layouts vary by year and model, the exact path can differ. If you can’t find the option described above, check your owner’s manual or Ford’s official support pages for instructions tailored to your vehicle’s year and trim level. A dealer or tire shop can also perform a TPMS relearn if needed.

What to do if you can’t locate the TPMS button

If the button isn’t visible and you can’t locate the reset option in the menus, try these steps: first, ensure all tires are inflated to the recommended cold pressures listed on the door placard. Then consult the owner’s manual for the exact TPMS reset procedure for your model-year. If the warning light stays on or you notice a tire issue, contact a Ford service center or a qualified tire shop for diagnosis and relearn assistance.

Summary

Ford vehicles do not share a single universal TPMS button. The location, if any, and the reset method vary by model and year. Common possibilities include a physical button on the dash, in the glove box, or center console, or a digital reset option in the instrument cluster or infotainment system. Always inflate tires to the recommended pressure, follow the model-specific reset steps, and seek professional help if the warning persists.

How to turn off TPMS on Ford?

And it says TPMS. Additional change required. So it says enabled that is your TPMS. System after you have it selected click edit. And we're going to go to disabled.

Where is the TPMS button located?

The TPMS button location varies by vehicle, but it is commonly found under the steering wheel on the driver's side, inside the glove compartment, or on the center console. In newer cars, the function is often available through the vehicle's infotainment or navigation system's settings menu. You should always consult your owner's manual for the exact location and reset procedure for your specific car. 
You can watch this video to see where the TPMS button is located in a Toyota Tacoma: 1mApple DrainsYouTube · Mar 21, 2021
Common locations

• Under the steering wheel: Look on the dashboard to the left of the steering column for a button labeled with the TPMS symbol. 
• Glove compartment: The button may be located inside the glove compartment on some models. 
• Center console: Check the center console area, which can be a common spot for vehicle control buttons. 
• Infotainment system: Newer vehicles may not have a physical button. Instead, you'll need to navigate through the touchscreen menu. Look for settings related to the vehicle, and then find the TPMS calibration or reset option. 

How to find the exact location

• Check the owner's manual: This is the most reliable method, as it will provide specific instructions for your vehicle. 
• Look for the TPMS icon: The button, if it exists, will usually be labeled with an icon that looks like a tire with an exclamation point inside. 

Where is the tire pressure sensor reset button located on a Ford?

The Ford tire pressure sensor reset button is usually located underneath the steering wheel, but the reset procedure can vary by model. Some models have a dedicated physical button, while others use a touchscreen menu on the driver information center or a sequence of button presses. After performing the reset, you will need to inflate your tires to the correct pressure, and sometimes a short drive is necessary for the system to recalibrate. 
You can watch this video to learn how to reset the TPMS light on a Ford Fusion: 59sThe Driver ModYouTube · Jan 5, 2022
Common reset button location and procedure 

• Location: Look for a button, often labeled "TPMS" or similar, beneath the steering wheel, near the dashboard, or on the driver's side door. 
• Physical button: If you have a dedicated button, turn the key to the "On" position (without starting the engine) and press and hold the button until the TPMS light on the dashboard blinks three times. 
• Touchscreen: On newer models, use the touchscreen to navigate to the "Settings" menu, then find the "Vehicle" or "Tire Pressure" settings to find the reset option. 

Alternative reset procedures

• Button sequence: Some Fords require a specific sequence of button presses. For example, a common method involves pressing the brake pedal for three seconds, then pushing the start button three times, leaving it on the third time. 
• Hazard lights: For some models, you can initiate the reset by turning the ignition to the "On" position and then pressing the hazard light button three or six times until you hear a beep. 

After the reset

• Add air to tires: Inflate all tires to the recommended pressure, plus about 333 PSI over the recommended amount. 
• Drive the vehicle: In some cases, you will need to drive for a few minutes at a speed above 202020 mph to allow the system to recalibrate. 

This video demonstrates how to reset the TPMS light using the hazard lights button on a 2020 Ford Transit: 54sTry it yourselfYouTube · Dec 14, 2022
If you still have problems

• Consult your owner's manual for the exact reset procedure for your vehicle. 
• If the light remains on, have a dealership or mechanic check the system, as there could be a sensor failure. 

How to put Ford into TPMS mode?

Ford TPMS Sensor Training

1. Turn the ignition to the OFF position.
2. Turn the ignition to the RUN position three times, ending in the RUN position.
3. Press and hold the brake pedal.
4. Turn the ignition switch to the OFF position.
5. Turn the ignition switch to the RUN position three times, ending in the RUN position.