Are Silverado and Colorado the same bolt pattern?
For the most common light‑duty configurations, yes—the Silverado 1500 and the Chevrolet Colorado share the same lug pattern: 6 bolts on a 139.7 mm circle. However, not all Silverado variants use this pattern, and year-to-year changes or different models can alter compatibility. Always verify by model and year.
Bolt pattern basics
Understanding wheel compatibility starts with two numbers: how many bolts and the diameter of the circle those bolts form. The Chevrolet Silverado 1500 and Chevrolet Colorado—the two mainstream GM pickups—primarily use a 6x139.7 mm pattern for light-duty models, with a hub bore around 78.1 mm. Center bore size and brake component clearance also influence whether a wheel will fit properly.
Shared pattern for light-duty GM pickups
The Silverado 1500 and the Colorado (especially in recent generations) both use the 6x139.7 bolt pattern, which means many wheels are interchangeable between these two trucks. The typical hub bore is about 78.1 mm, and your main checks should focus on offset and caliper clearance in addition to the lug pattern.
Exceptions and heavy-duty variants
GM’s heavy-duty Silverado models, such as the 2500HD and 3500HD, use a different bolt pattern: 8x170. This means wheels from a 6x139.7-equipped Colorado or Silverado 1500 will not fit HD models without adapters or alternate wheels. Always confirm the exact pattern for your specific year and trim, as some special editions or aftermarket wheels may differ.
To help you verify compatibility beyond the general rule, here are the quick checks:
- Check the vehicle’s exact bolt pattern in the owner’s manual or on a trusted parts database (look for 6x139.7 or 8x170, etc.).
- Measure the center bore to ensure proper seating; GM light‑duty patterns typically use around 78.1 mm, and you may need hub-centric rings if the wheel’s bore is larger.
- Confirm brake caliper clearance and rotor diameter to avoid rubbing or interference with the wheel spokes.
- Verify wheel offset and width to ensure proper fitment and alignment without rubbing against suspension components or fenders.
In short, the light‑duty Silverado 1500 and Colorado generally share the same 6x139.7 mm bolt pattern, making many wheels interchangeable, but the Silverado HD family uses a different 8x170 mm pattern. Center bore and caliper clearance can also affect fit, so always verify before swapping wheels.
Summary
Bottom line: For most owners, Silverado 1500 and Colorado wheels are compatible due to the common 6x139.7 mm pattern. Heavy‑duty Silverado models use 8x170 mm, which is not interchangeable with the light‑duty pattern. Always check the exact year, model, and wheel specifications, including center bore, offset, and caliper clearance, to ensure a proper, safe fit. When in doubt, consult the wheel manufacturer’s fitment charts or a professional installer.
Will 6x5 5 fit a Chevy Colorado?
5 1''(25mm) Wheel Spacers Fit for Chevrolet Colorado 2004-2014, for Dodge Ram 50 D50, for Ford Ranger 2013-2022, for GMC Canyon 2004-2012, 108mm Wheel Adapters with M12x1. 5 Studs.
Will Chevy Silverado rims fit on a Colorado?
Whether Chevy Silverado rims will fit on a Colorado depends on the year of both vehicles, as the bolt pattern changed for the Colorado. Early Colorado models (first generation) share the same 6x5.5 inch (or 6x139.7mm) bolt pattern as most Silverado models and should fit, though you may need hub-centric rings due to differences in hub size. However, later Colorado models (starting around 2015 for the second generation) use a 6x120mm bolt pattern, which will not fit a Silverado.
Before you try to fit Silverado rims on a Colorado
- Determine your Colorado's bolt pattern: Check the inside of the driver's door jamb for a sticker, or check your owner's manual. If it's a first-generation Colorado, it's likely 6x5.5". If it's a second-generation or newer, it's 6x120mm.
- For early Colorados (6x5.5"):
- Bolt pattern is the same: The bolt pattern is the same as most Silverado models.
- Check the hub: The Colorado's hub bore is larger than the Silverado's, so you will likely need hub-centric rings to center the Silverado rim properly on the Colorado's hub.
- For newer Colorados (6x120mm):
- Bolt pattern is different: A 6x120mm pattern is not compatible with the Silverado's 6x139.7mm bolt pattern.
- You will need adapters: The only way to make these fit would be with adapters, which can add complexity and may not be a recommended solution for all setups.
What bolt pattern is Chevy Colorado?
The Chevy Colorado's bolt pattern varies by generation: the first generation (2004–2012) and the third generation (2023–present) use a 6x139.7 mm (or 6x5.5 inch) bolt pattern, while the second generation (2011–2023) uses a 6x120 mm bolt pattern.
By generation
- 1st Gen (2004–2012): 6x139.7 mm
- 2nd Gen (2011–2023): 6x120 mm
- 3rd Gen (2023–Present): 6x139.7 mm
How to determine the correct bolt pattern
- Check your specific model year, as the pattern changed with the generation.
- 6x139.7 mm: This is a very common pattern and is shared with the Silverado 1500 and many other trucks.
- 6x120 mm: This pattern was used in the middle generations, often from around 2015 to 2020.
Do all Chevy trucks have the same bolt pattern?
For the most part, yes, they are the same. Over the years many Chevy wheel bolt patterns have been reused, including the Chevy 6-lug pattern. For Chevy vehicles with Chevy 6-lug measurements, the pattern is usually a 6-lug, 5.5-inch standard or medium offset.
