Can I use 26 wiper blade instead of 24?
The short answer is that you can generally use a 26-inch wiper blade instead of a 24-inch wiper blade, as long as the 26-inch blade fits your vehicle's wiper arm. However, there are a few important factors to consider before making the switch.
Wiper Blade Size Compatibility
Wiper blades come in a variety of sizes to fit different vehicle models. The size of the wiper blade is typically determined by the length of the wiper arm on your car. Most passenger vehicles use wiper blades that range from 16 to 28 inches in length.
When replacing your wiper blades, it's important to match the size to your vehicle's specifications. Using a wiper blade that is too small may not effectively clear your windshield, while a blade that is too large may not fit properly on the wiper arm.
Considerations for Upgrading to a 26-Inch Wiper Blade
If your vehicle is designed for a 24-inch wiper blade, you may be able to use a 26-inch blade instead, but there are a few things to keep in mind:
- Fit and Compatibility: Ensure the 26-inch blade is compatible with your vehicle's wiper arm. It should attach securely without any gaps or loose fit.
- Windshield Coverage: A slightly larger 26-inch blade may provide better coverage and visibility on your windshield compared to a 24-inch blade.
- Aesthetics: The larger 26-inch blade may look slightly out of place or disproportionate on your vehicle if the 24-inch size is the factory-recommended option.
Ultimately, as long as the 26-inch wiper blade fits your vehicle properly, you can use it as a replacement for a 24-inch blade. However, it's always best to consult your owner's manual or contact the vehicle manufacturer to confirm the recommended wiper blade size for your specific make and model.
Is it OK to use shorter wiper blades?
Choosing a blade that's too short can leave large areas of your windshield unaffected, lowering your visibility. Blades that are too long can hit each other and cause damage to the blade mechanism.
Can I use a different size wiper blade?
Using a wiper blade that was not intended for your vehicle could lead to subpar performance because wiper blades are meticulously built to fit the precise curvature of a vehicle's windscreen. Therefore, it's always advisable to use the wiper blade size that is suggested for your car.
Can you cut wiper blades to size?
If the refill is longer than the frame, cut the excess parts using a knife or scissors. Push back the metal reinforcing with the pliers to ensure the blade is properly locked into the wiper blade.
Can I use a 26 wiper blade instead of a 24?
Size matters to a point, just as long as you are about 1 inch higher or lower than your current wiper blade size. If you buy wiper blades that are too big, they might overlap or touch which will cause them to break.
Do wiper blades have to be exact?
Check your owner's manual and only replace your wiper blades with the size specified by the manufacturer. This will ensure proper fit and prevent unwanted damage.
Can I buy smaller wiper blades?
There are a range of wiper blades available, in sizes from 9" to 32" or 250mm through to 813mm. If you replace your wiper blades with smaller blades, they won't cover the entire windscreen - leaving gaps.
What happens if I use the wrong size wiper blades?
The right wiper blade size can be the difference between crystal-clear vision and a blurred horizon. Too short, and you're left with unseen obstacles; too long, and they might just do a tango on your windshield.
How to shorten a wiper blade?
And then you can adjust the length of the arm by pulling on the outer part of the arm. And then at the desired length just look the mechanism. Again. And you're done good luck.
