Do Mustang wheels fit Ford Falcon?
The short answer is that Mustang wheels can generally fit a Ford Falcon, but there are some important considerations to keep in mind. The compatibility of Mustang wheels on a Falcon depends on factors such as wheel size, bolt pattern, and offset.
Wheel Size Compatibility
The Ford Mustang and Ford Falcon share some similarities in their wheel sizes, which makes it possible to use Mustang wheels on a Falcon. The most common wheel sizes for the Ford Falcon are 14-inch, 15-inch, and 16-inch, while the Ford Mustang typically uses 15-inch, 16-inch, and 17-inch wheels.
So, in many cases, you can use 15-inch or 16-inch Mustang wheels on a Ford Falcon without any issues. However, it's important to double-check the specific wheel sizes and ensure they will fit properly on your Falcon's suspension and brakes.
Bolt Pattern and Offset
Another key factor is the bolt pattern and offset of the wheels. The Ford Falcon and Ford Mustang generally have the same 5x4.5-inch (114.3mm) bolt pattern, which means the wheels will bolt up without any problems.
The offset, which is the distance between the wheel's mounting surface and the centerline of the wheel, is also an important consideration. Mustang wheels typically have a slightly different offset than Falcon wheels, so you may need to use wheel spacers or make other modifications to ensure a proper fit.
Other Considerations
- Ensure the wheel diameter, width, and offset are compatible with your Falcon's suspension and brakes.
- Check the weight capacity of the Mustang wheels to make sure they can safely support the weight of your Falcon.
- Consider the overall aesthetic and whether the Mustang wheels will complement the look of your Falcon.
In summary, Mustang wheels can generally fit a Ford Falcon, but you'll need to carefully consider the wheel size, bolt pattern, and offset to ensure a proper and safe fit. It's always best to consult with a professional mechanic or wheel specialist to ensure compatibility and safety.
What bolt pattern are Mustang wheels?
5×114.3
Will a 5x114.3 fit a 5x115?
This can lead to unnecessary movement and vibration because the wheels can't fit snugly onto the Hub due to the 0.7. Millimeters difference driving.
Was the Mustang based on the Ford Falcon?
From 1965 to 1973, the Mustang was derived from the 1960 Ford Falcon compact. From 1974 until 1978, the Mustang (denoted Mustang II) was a longer-wheelbase version of the Ford Pinto.
What stud pattern is Ford Falcon?
5x114.3
For the Ford Falcon, the PCD is 5x114. 3. This means there are five bolts, and they sit on a circle with a diameter of 114.3mm.
Why did Ford stop the Falcon?
In May 2013, Ford Australia announced the end of local production, which consisted of Falcon and its closely related Territory crossover SUV, by October 2016. This decision was attributable to Ford Motor Company's "One Ford" product development plan introduced in 2008 to rationalise its global range.
What chassis was the Mustang built on?
For the 1980s, the chassis came into wider use, supporting both the Ford Mustang and the Ford Thunderbird. Designed to be relatively lightweight and simple, the Fox platform was a rear-wheel drive chassis that utilized a wide variety of powertrains.
What offset are Mustang wheels?
Mustang Wheel Offset Chart
| Mustang Year and Model | Offset | Stock Wheel Size |
|---|---|---|
| 1994-2004 Mustang | 35-50mm | 15-18” |
| 2005-2009 Mustang | 35-50mm | 16-18” |
| 2010-2014 Mustang | 35-50mm | 17-19” |
| 2015-2023 Mustang | 35-52.5mm | 17-20” |
What bolt pattern is the same as Ford?
Later, Chrysler moved to a smaller bolt pattern and stayed with it for many years. This pattern is also shared with Ford, as it is the 5x4. 5-inch pattern. The pattern was used on many Dodge, Chrysler and Plymouth vehicles from the 1950s through the 1980s.
Do Mustang wheels fit Falcons?
Great news for Mustang owners, theirs is 5x114. 3 – same as the Falcon, in fact, a common fitment with lots of available styles to suit your tastes.
What size are Ford Falcon wheel studs?
Have Questions??
| Thread | 1/2-20 in |
|---|---|
| Underhead Length | 3.5 in |
| Screw In/Press In | Press In |
| Knurl Diameter | 0.625 in |
| Knurl Length | 0.4 in |
