Does a queen mattress fit in a HiAce?
In short, yes—it's possible in many Toyota HiAce configurations, especially with a long-wheelbase and/or high-roof model and by removing or stowing the rear seating to create a flat load surface. The key factors are interior length, interior width, and door-clearance when maneuvering the mattress inside.
The standard queen mattress measures 60 inches wide by 80 inches long (about 152 cm by 203 cm). Whether it fits in a HiAce depends on the specific van variant and how you configure the interior for loading and sleeping.
Key dimensions to check
To determine fit for a queen mattress, compare the mattress dimensions with the HiAce’s usable interior space and door openings.
- Internal length: from the back of the front seats to the rear doors (or bulkhead) to see how long a mattress can lie flat.
- Internal width: space between the side interior walls and the wheel arches to gauge mattress width feasibility.
- Door opening widths: clearance for bringing the mattress through the rear hatch and any side doors.
If these measurements accommodate a 80-inch length and a 60-inch width (or allow a small degree of maneuvering in), you have a workable path to loading a queen mattress flat.
HiAce variants and practical layouts
Model choice and seating configuration significantly affect usable cargo space. Here’s how different setups influence fit.
- Long-wheelbase (LWB) vs short-wheelbase (SWB): LWB generally offers a longer flat floor, increasing the chance of placing a queen mattress lengthwise after seat removal.
- Roof height: High-roof variants provide more vertical clearance, which helps with stacking or accommodating a mattress once inside.
- Seating configuration: Keeping rear seats in place usually reduces flat loading length; removing or folding seats creates a longer, flat floor for the mattress.
In practice, a Queen is most likely to fit when you combine an LWB or high-roof configuration with seat removal, then lay the mattress along the floor rather than trying to rotate it through a narrow opening.
Practical loading tips for a queen mattress
Follow these steps to maximize your chances of success and protect the vehicle interior during loading.
- Remove or fold down rear seats to create a flat, uninterrupted loading surface.
- Measure interior length and width on your exact vehicle model, as factory floor irregularities and wheel-arch placement can reduce usable space.
- Deflate or partially compress inflatable components if using an inflatable mattress; for foam or spring mattresses, consider a mattress protector to facilitate sliding.
- Use moving blankets, straps, and a ramp or dolly if needed to protect both the mattress and van walls during loading and unloading.
With careful loading and proper protection, many HiAce owners report successful accommodation of a queen mattress in the right configuration.
Alternatives if a queen won’t fit
If the queen does not fit flat, consider splitting the setup into two sections: two twin XLs placed side by side, or using a full/double mattress with a flexible layout. Another option is a high-quality inflatable mattress that can be partially deflated to pass through doors and then re-inflated inside the vehicle.
Bottom line
The feasibility of fitting a queen mattress in a HiAce hinges on the van variant (LWB and/or high-roof are most favorable) and on removing or reconfiguring seating to create a longer flat floor. Always measure your specific interior length, width, and door openings before attempting loading, and plan for protective padding and secure anchoring once inside.
Summary
A queen mattress can fit in a Toyota HiAce in many cases, especially with the long-wheelbase and high-roof models when the rear seats are removed to create a flat loading surface. Key steps are to verify interior length and width, ensure door openings are sufficient, and use proper loading techniques and protective materials. If measurements fall short, consider two twin XLs, a full/double mattress, or an inflatable option as alternatives.
What size bed can fit in a Toyota Sienna?
In terms of standard mattress sizes, the closest mattress that will fit in the back of most Toyota models is a Twin.
How much space is in the back of a Toyota Hiace?
For maximum space and convenience, HiAce LWB van fits up to 6.2 cubic metres of cargo.
Can a queen size mattress fit in a van?
Yes, a queen-size mattress can fit in a van, but it requires a large enough one and specific loading techniques. A standard 9-foot or larger cargo van can fit a queen mattress, while smaller vans or minivans will be too narrow due to the wheel wells. You will likely need to place the mattress on its side or at an angle to get it through the door and into the correct position.
How to fit a queen mattress in a cargo van
- Ensure the van is large enough: A standard cargo van is often long and wide enough to fit a queen mattress. A medium cargo van is also suitable, but smaller cargo vans and minivans are typically too narrow, especially between the wheel wells.
- Use a mattress bag: Protect the mattress during the move by putting it in a mattress bag.
- Load the box spring first: Angle the box spring to get it through the rear doors. Once inside, rest it against the driver's side wall.
- Load the mattress on top: Place the mattress on top of the box spring to provide support and help it maintain its shape.
- Consider folding: If the mattress is foam, you may be able to fold it in half and secure it with a strap to fit it in a smaller vehicle, though this is not recommended for a longer drive and can cause damage.
What size van to move a queen mattress?
A medium van often fits a queen-size mattress (placed upright), small appliances, and around a dozen boxes. It's easier to navigate through city traffic than a larger vehicle.
