What is the part number for Toyota engine oil 5w30?
For Toyota vehicles, there isn’t a single universal part number for 5W-30 engine oil. The exact number depends on your model year, region and whether you’re buying Toyota Genuine Motor Oil or an approved alternative that meets Toyota’s specifications.
In this article, we'll explain how Toyota labels engine oil, why part numbers vary, and how you can locate the exact part number you need. We’ll also offer guidance on compatible alternatives when a Toyota part isn’t readily available in your area.
Understanding Toyota’s oil labeling and why numbers differ
Oil that meets Toyota’s requirements is typically sold as Toyota Genuine Motor Oil (TGMO) or as a third-party brand that is certified to meet Toyota’s specifications. The part number used by Toyota for TGMO usually starts with a region-wide prefix, but the trailing digits vary by product line, grade, and region. Because engines and model years differ, the same 5W-30 grade can have multiple part numbers across markets and dealer programs.
Genuine vs. approved alternatives
Genuine Toyota Motor Oil is designed to meet the exact specifications of Toyota engines and can help guarantee compatibility. Many third-party oils also meet Toyota’s specifications (viscosity 5W-30 and the appropriate API/ILSAC and Toyota performance specs). Always verify on the product label that the oil meets the grade, API/ILSAC requirements, and Toyota’s service-grade spec for your vehicle.
How to find the exact part number for your vehicle
To locate the correct part number, use these steps:
- Identify your vehicle’s year, make, model, engine code, and drivetrain. This information is usually on the owner’s manual, door jamb label, or vehicle registration.
- Check the owner’s manual or the official Toyota parts catalog for your region. The catalog will list TGMO 5W-30 part numbers based on model/year and engine variant.
- Enter your vehicle Identification Number (VIN) into an official Toyota parts lookup or consult a Toyota dealer to pull the exact compatible part number.
- Verify the labeling on the oil bottle to ensure it matches the required viscosity (5W-30) and meets API/ILSAC and Toyota specifications for your engine.
Following these steps will normally yield the exact Toyota part number for 5W-30 engine oil for your vehicle. If the catalog or dealer supplies a non-Toyota brand that meets the same specs, you can use that as an alternative, provided it’s certified to meet Toyota’s requirements.
What to do if you can’t access the official catalog
If the official catalog isn’t accessible, you can still buy a compatible 5W-30 oil by verifying the following on the label:
- The oil is 5W-30 viscosity.
- The oil meets API SP (or SN) and ILSAC GF-6 (or GF-5 as applicable) standards.
- The oil is listed as suitable for Toyota engines or explicitly states compatibility with Toyota vehicles.
When in doubt, contact a Toyota service center or authorized dealer to confirm the correct part number or a suitable alternative that meets Toyota’s specifications.
Tips for buying and re-filling
When purchasing oil, consider these practical tips to avoid mistakes and ensure performance and warranty compliance.
- Always verify the grade and brand align with your owner’s manual and engine code; in some climates, 5W-30 may be recommended, while others require different grades.
- Avoid mixing oils of different viscosities or formulations unless explicitly recommended by Toyota.
- Keep a receipt or service record showing the exact oil and part number used for future maintenance.
With the correct part number and brand verified, you can complete a 5W-30 oil change confidently, keeping your Toyota engine running smoothly.
Summary
There isn’t a single global part number for Toyota’s 5W-30 engine oil. The right number depends on your vehicle’s specifics, region, and whether you use Toyota Genuine Motor Oil or a certified alternative. Always verify through the owner’s manual, official Toyota catalogs, or a dealer with your VIN to ensure compatibility and warranty compliance.
What is the part number for Toyota 5w30?
Product specifications
| Brand Name | Toyota |
|---|---|
| Manufacturer Part Number | 00279-1QT5W-01 |
| Manufacturer | Genuine Toyota Parts |
| Best Sellers Rank | #7,089,581 in Automotive (See Top 100 in Automotive) #7,955 in Motor Oils |
| ASIN | B00TNNTC9A |
Are all 5-30 engine oils the same?
No, not all 5W-30 oils are the same, as they must meet specific manufacturer requirements for a given engine. While many 5W-30 oils may seem similar because they share a viscosity grade, they differ in their additive packages, base oils, and compliance with various industry and manufacturer-specific specifications. It is crucial to use an oil that meets the exact specifications listed in your owner's manual for optimal engine performance and longevity.
Key differences between 5W-30 oils
- Manufacturer specifications: Different engine designs, especially those with turbochargers or direct injection, have unique lubrication needs. The oil must meet specific requirements, such as a VW 507.1 spec, which might be more important than the viscosity alone.
- Additives and base oil: Oils vary in the specific additives used and the type of base oil (conventional, synthetic blend, or full synthetic). These differences affect their performance, especially under extreme temperatures and pressures.
- Viscosity: While all 5W-30 oils have the same viscosity rating, their performance can vary. For example, some oils might have a slightly different viscosity when cold or at high temperatures, which is a key factor in how they perform and protect your engine.
- Quality and performance: Higher-quality oils, particularly full synthetics, may offer better performance and protection. Using a lower-grade oil than what is recommended can lead to poor lubrication and potential damage.
How to choose the right 5W-30 oil
- Consult your owner's manual: This is the most important step. The manual will specify the correct oil grade and any specific industry or manufacturer certifications your engine requires.
- Match the specifications: Choose an oil that explicitly states it meets the specifications and certifications listed in your manual. Don't just assume any 5W-30 is okay.
- Prioritize specifications over brand: The manufacturer's specification is a more critical factor than the oil brand. Many oils from different brands will meet the same specifications and are interchangeable.
- Consider synthetic oil: If your manual allows, synthetic oil is often a better choice due to its superior performance and protection.
Can I use 5w30 instead of 0W20 Toyota?
Yes, you can use 5W-30 instead of 0W-20, especially in warmer climates or if you tow heavy loads, though it may slightly decrease fuel economy. The main difference is viscosity: 5W-30 is thicker when cold and at operating temperature, which can offer better protection in hot weather, but 0W-20 is specifically recommended by Toyota to maximize fuel efficiency and performance for most conditions. It is best to check your owner's manual, as it may list 5W-30 as an acceptable alternative for certain driving conditions.
When to consider using 5W-30
- Hot climates: A slightly thicker oil can provide better protection at high temperatures.
- Heavy towing or hard driving: A thicker oil film can be beneficial under high-load conditions.
- Higher mileage vehicles: Some sources suggest that 5W-30 can be better for engines with over 75,000 miles.
Potential downsides of using 5W-30
- Reduced fuel economy: The primary reason for the 0W-20 recommendation is to meet fuel efficiency standards, and using a thicker oil may lead to a slight decrease in gas mileage.
- Slower cold starts: The "0W" rating in 0W-20 means it flows faster in very cold temperatures, offering quicker lubrication during cold starts compared to 5W-30.
What to do
- Check your owner's manual: The manual is the definitive source and may list acceptable alternative viscosities for your specific vehicle and driving conditions.
- Consider your climate: If you live in a place with very hot summers or if you frequently tow, 5W-30 is a viable option.
- For a 2019 Toyota Camry, some sources recommend 0W-16 as the correct oil, not 0W-20, for the 4-cylinder engine. If you have a 4-cylinder engine, consult your owner's manual to confirm the correct oil weight, which may be 0W-16 or 0W-20.
- If you have a car with over 75,000 miles, consider switching to 5W-30.
- If you choose to switch, be sure to use a high-quality synthetic oil with the correct API and ILSAC GF-6 certifications.
Which engine oil is used by Toyota?
Toyota recommends checking the owner's manual for the correct oil type, but most modern Toyotas use 0W-20 full synthetic motor oil. Older models may require a different viscosity, such as 5W-30. While any ILSAC-certified synthetic oil with the correct viscosity can be used, using Genuine Toyota Motor Oil ensures a specific additive package for that vehicle.
Oil type and viscosity
- Most modern Toyotas: Use 0W-20 full synthetic oil.
- Older models: May require a different viscosity like 5W-30.
- Newer hybrid models: May use 0W-16 or even 0W-8 for maximum fuel efficiency.
- Older trucks and SUVs: Might use thicker oils like 5W-20 or 10W-30 for more demanding conditions.
Other brands vs. genuine Toyota oil
- Other brands: Other 0W-20 synthetic oils can be used as long as they are certified to meet Toyota's standards (look for the ILSAC certification on the bottle).
- Genuine Toyota oil: Toyota offers its own branded full synthetic oils with a proprietary additive package designed for its engines.
How to be certain
- Always consult your specific vehicle's owner's manual for the exact type and viscosity of oil recommended for your engine.
