Does Honda CR-V tell you which tire is low?
Yes. In most recent CR-V models equipped with a Tire Pressure Monitoring System (TPMS) display, you can see which specific tire is low. Some older or more basic trims may only show a general warning light, requiring a manual tire pressure check. The exact behavior depends on the model year and trim level.
How the CR-V's TPMS works
The CR-V uses direct TPMS sensors in each wheel to monitor tire pressure and alert you if any tire falls below the recommended level. When a tire is low, the dashboard warning light typically activates. On models with a dedicated TPMS or tire-pressure page in the driver information display (or infotainment system), you can view per-tire pressures and identify the low tire at a glance. The recommended cold tire pressures are listed on the driver’s door jamb placard and in the owner's manual.
Can the CR-V identify the exact tire?
It depends on the year and trim. Newer CR-Vs with a digital instrument cluster and a TPMS/readout screen usually display each tire's current pressure and highlight the tire that is below the threshold. The display may label tires as LF (left-front), RF, LR (left-rear), and RR, or show a car diagram with color-coded indicators. If your model lacks this per-tire readout, you’ll still get the standard TPMS warning light and must inspect the tires manually.
Note that menu names and layouts vary by year and trim. In general, you access the TPMS or Tire Pressure page from the driver information display or the infotainment system to see per-tire data.
Steps to view per-tire pressures on CR-V models with a digital display
Use the following steps on CR-Vs that provide a per-tire TPMS readout. Exact wording and menu names can vary by year and trim.
- Turn the ignition to ON (you can view data with the engine running or just in the accessory position).
- From the driver information display or the main touchscreen, locate the TPMS or Tire Pressure page.
- Select Tire Pressure or TPMS to view the pressures for each tire. Look for a tire labeled as low or a reading below the recommended value.
- Identify the tire position (front-left, front-right, rear-left, rear-right) as shown on the display, which may use LF, RF, LR, RR or a car diagram.
- Inflate or repair the low tire to the recommended cold pressure, then drive a short distance to allow the TPMS to recalibrate if needed.
Concluding: When your CR-V provides a per-tire readout, it makes locating and addressing a low tire quick and straightforward.
What to do if your CR-V shows only a generic TPMS warning
Some configurations may display only a general TPMS alert without per-tire detail. If that happens, follow these steps to identify and fix the issue:
- Check all tires with a reliable gauge when the tires are cold, including the spare if applicable. Compare readings to the door jamb placard’s recommended pressures.
- Inflate each tire to the recommended cold pressure. If a tire is low, adjust to spec.
- Drive a few miles to allow the TPMS to refresh. If the warning persists after proper inflation, there may be a sensor fault or leak requiring service.
- Inspect valve stems and sensors for damage if no tire appears low after inflation; a faulty sensor can trigger the warning.
Concluding: If the per-tire readout isn’t available on your CR-V, rely on manual pressure checks and have the TPMS inspected if the warning remains after inflation.
Summary
In short, the Honda CR-V typically tells you which tire is low when you have a model with a per-tire TPMS readout in the instrument cluster or infotainment display. Availability depends on the year and trim. If your CR-V lacks the per-tire detail, you’ll receive a general TPMS warning and should perform manual tire pressure checks until you confirm all tires are at the recommended level. Regularly checking tire pressures helps maintain safety, fuel efficiency, and optimal tire wear.
