How big of tires can a Dana 50 handle?
The Dana 50 axle is a robust and versatile automotive component that can handle a wide range of tire sizes. Depending on the specific application and modifications, a Dana 50 can typically accommodate tire sizes ranging from 33 to 37 inches in diameter.
Understanding the Dana 50 Axle
The Dana 50 is a heavy-duty, full-floating rear axle commonly found in various trucks, SUVs, and off-road vehicles. It is known for its durability and ability to handle high loads and torque. The Dana 50 is often used in applications where a strong and reliable axle is required, such as in heavy-duty trucks, Jeeps, and other off-road vehicles.
Factors Affecting Tire Size Compatibility
The maximum tire size that a Dana 50 can handle depends on several factors, including:
- Gear Ratio: The gear ratio of the Dana 50 axle can impact the maximum tire size. A lower gear ratio (e.g., 3.73:1) will allow for larger tires compared to a higher gear ratio (e.g., 4.10:1).
- Suspension Modifications: Modifications to the suspension, such as lift kits or other components, can affect the maximum tire size that can be accommodated without causing interference or rubbing.
- Clearance: The available clearance between the tires and the vehicle's body, fenders, and other components is a critical factor in determining the maximum tire size.
- Axle Strength: The overall strength and durability of the Dana 50 axle itself can also play a role in the maximum tire size it can handle, as larger tires can put more stress on the axle components.
It's important to note that the specific tire size compatibility for a Dana 50 axle can vary depending on the vehicle, modifications, and other factors. It's always recommended to consult with a professional or refer to the vehicle manufacturer's specifications to determine the maximum tire size that can be safely installed.
Typical Tire Sizes for Dana 50 Axles
In general, a Dana 50 axle can typically handle tire sizes ranging from 33 to 37 inches in diameter, with some exceptions. Many Jeep Wrangler and other off-road vehicles equipped with Dana 50 axles are often outfitted with 35-inch or 37-inch tires, depending on the specific model and modifications.
It's important to ensure that any tire size changes are compatible with the vehicle's suspension, brakes, and other components to maintain safe and proper operation.
What is the weight rating of the Dana 50?
5000 lbs.
The GAWR of a solid axle Dana 50 is 5000 lbs.
What is the axle ratio for the Dana 50?
The Dana 50 Monobeam front axle was available in three factory ratios: 3.73, 4.10, and 4.30. Since Dana 50IFS axles from 1980-1997 F250 4x4s use the same differential case, you also have one optional ratio available: 3.54 (QU20274U) .
How big of tires can a Dana 60 handle?
A modern Dana 60 front axle comes stuffed with much stronger 1.5-inch-diameter, 35-spline axleshafts (center), which can safely handle 37-to-44-inch tires.
How much can a Dana 60 tow?
Dana 60 rear axle
Manufactured in both full float and semi float variations. The semi float axles have GAWR up to 5,500 lbs and the full float axles were rated up to 6,500 lbs.
Can I put 35s on a Dana 30?
If you elect to run 35s with a Dana 30 front axle, your best bet is to take steps to fortify the front axle housing using any of the widely offered axle housing strengthening kits, which typically include gussets for the knuckles and sleeves for the tubes.
What size tires can a Dana 50 handle?
In fact, the Dana 50 and 60 high-pinion Super Duty axles have more in common than you might realize. As you may infer from its name, the Dana 50s overall size and strength rest between that of a Dana 44 and Dana 60. For those looking to run up to a 37-inch tire, the Dana 50 is well-suited.
How much weight can a Dana 70 handle?
All Dana 70 rear axles are full floating and typically have a gross axle rating of 7,500 lb (3,400 kg).
Which is stronger 14 bolt or Dana 80?
By the numbers, the load-carrying and therefore torque capacity of the three axles from weakest to strongest is: 14-bolt, Dana 70, and Dana 80.
What is the biggest tire for a Dana 35?
The majority of failures on a Dana 35 axle relate to weak 27-spline C-clip-style axleshafts. The factory never intended for these shafts to last with larger than 33-inch tires.
How strong is the Dana 50?
around 4,500 to 5,500 pounds
The gross axle weight rating (GAWR) for the Dana 50 front axle is typically around 4,500 to 5,500 pounds, depending on the configuration and model year. This makes it stronger than the Dana 44 and more suitable for heavy-duty applications, but not as robust as the Dana 60.
