Where is the power steering control module on a 2011 Chevy Equinox?
The power steering control module on a 2011 Chevy Equinox is typically located under the hood, near the front of the vehicle. This module is responsible for controlling the power steering system, which assists the driver in turning the steering wheel with minimal effort.
Locating the Power Steering Control Module
To find the power steering control module on a 2011 Chevy Equinox, follow these steps:
- Open the hood of the vehicle and locate the engine compartment.
- Look for a rectangular or square-shaped module, usually mounted on the firewall or near the front of the engine.
- The module may be labeled "Power Steering Control Module" or have a similar designation.
- If you're unsure, consult your vehicle's owner's manual or a repair manual for the specific location of the power steering control module.
Knowing the location of the power steering control module can be helpful if you need to diagnose or replace the module in the future.
Where is the steering column control module?
A steering column control module (“SCCM”), positioned on the steering column just below the steering wheel, functions as a central nexus for the systems. Stalk lever switches are attached to the left and right sides of the SCCM.
Does electric power steering have a steering pump?
Hydraulic systems, however, use hydraulic fluid powered by a power steering pump to help drivers turn the wheel. While an EPS is powered by the car's 12-volt (or higher) electrical system, the power steering pump is driven by the serpentine belt or another drive belt connected to the engine.
Where is the power steering control module on a 2012 Chevy Equinox?
The power steering control module is located on a bracket behind the drivers side of the dash. See picture below. Remove the knee bolster (panel below steering column) for access.
What are the symptoms of power steering control module?
Symptoms: Uneven response to steering wheel turns. Lack of assistance in specific steering directions. Rack movement without driver input during engine startup.
How do you know if your power steering module is bad?
Three vehicle pulling to One Direction. Four winding noise from power steering motor 5. Soft steering wheel at high speed 6. Vibrations from the steering rack. Let us see these symptoms in detail.
Where is the power control module located?
engine compartment
The PCM is typically found within the vehicle, close to the fuse box, or in the engine compartment. It is frequently concealed under several covers behind the front windscreen. The engine bay is the most typical position for the PCM, though the manufacturer has a few other options as well.
How do I reset my power steering control module?
Often, you can fix the problem by pulling off the road, shutting the car off, and letting it sit for a minute. When you turn the car back on, the system will reset itself. If it doesn't, you need to have the steering system inspected as soon as possible.
Where is the power steering module located?
Also, be aware that most power steering control modules will likely be mounted on or near the steering column or the steering gear.
How do I know if my power control module is bad?
Common signs of a malfunctioning PCM include engine misfires, stalling, decreased fuel economy, or issues with transmission shifting.
Does the 2011 Equinox have electric power steering?
These cars have electric power steering and no pump so l have no idea what the problem could be.
