How do I activate my Chevy remote start?

To activate the remote start feature on your Chevy vehicle, follow these simple steps. The remote start function allows you to start your car from a distance, so you can warm it up or cool it down before getting in.

Steps to Activate Chevy Remote Start

• Make sure your Chevy is equipped with the remote start feature. This is typically an optional add-on that can be purchased with your vehicle.


• Locate your Chevy key fob. The remote start button is usually a separate button, often labeled with an engine icon.


• Press and hold the remote start button for 2-3 seconds until the parking lights flash or the engine starts.


• To turn off the remote start, simply press the remote start button again.li>
  

The remote start feature on your Chevy allows you to start your vehicle from up to 200 feet away, so you can have it warmed up or cooled down before you get in. This can be especially useful on very hot or cold days. Just remember to never leave your vehicle running unattended, as that could be a safety hazard.

Additional Tips

• Make sure your Chevy is in park and the parking brake is engaged before using remote start.


• The remote start will automatically turn off after 10-15 minutes if you don't get in the vehicle.li>
  
• Some Chevy models may require you to press the lock button before pressing remote start for it to work.li>
  

By following these simple steps, you can easily activate the remote start feature on your Chevy vehicle and enjoy the convenience of a pre-warmed or pre-cooled car. If you have any further questions, be sure to consult your Chevy owner's manual or contact your local dealership for assistance.

How to activate Chevy remote start?

To activate Chevrolet remote start, lock the vehicle with the key fob, then press and hold the remote start button (circular arrow) for about four seconds until the lights flash. You can also use the myChevrolet mobile app by entering your PIN after pressing the "Engine Start" button in the "Remote Key Fob" section. To drive, you must get in, unlock the doors, and press the brake pedal along with the power/start button.
 
This video shows how to use the remote start on a Chevrolet key fob: 25sChevroletYouTube · Feb 28, 2018
Using the key fob

1. Lock the vehicle: Press the lock button on your key fob. 
2. Press and hold the remote start button: Press and hold the remote start button (it looks like a circular arrow) for about four seconds. 
3. Confirm activation: The vehicle's lights will flash, and the engine will start. The engine will run for 10 to 20 minutes before automatically shutting off. 
4. Extend the run time: To extend the time, repeat the lock and remote start button sequence before the initial period ends. 
5. Start driving: Once inside, unlock the doors with the key fob, get in, and press the brake pedal and the power/start button to fully activate the vehicle. 

Using the myChevrolet app 

1. Open the app: Launch the myChevrolet app and go to the "Key Fob" or "Remote Commands" section. 
2. Select remote start: Press the "Engine Start" button. 
3. Enter your PIN: Enter your personal identification number (PIN) to confirm the command. 
4. Start driving: After the vehicle starts remotely, unlock the doors with the app or fob, get in, press the brake pedal, and push the power/start button. 

This video shows how to use the myChevrolet app to remote start your vehicle: 58sBerger ChevroletYouTube · Feb 8, 2018
Troubleshooting tips

• Check the battery: The most common reason for remote start failure is a weak or dead key fob battery. Replace it with a new CR2032 battery if needed. 
• Ensure the vehicle is ready: All doors, the hood, and the tailgate must be completely closed and latched. The system also won't work if the hazard lights are on. 
• Confirm your key fob is outside the vehicle: The system is disabled if the key fob is inside the car. 

How do I activate remote start?

Times. Once started remotely the engine will run for 10 minutes and then shut. Off. You can extend the running time for another 10 minutes by repeating the start procedure during the initial. Period.

What is the circle button on a Chevy key fob?

The Remote Start button looks like an arrow pointing in a circle. Step 4: You should hear your vehicles engine start running. The vehicle will run for about 10 minutes on its own.

Why is myChevrolet remote start not working?

A Chevy's remote start won't work if a safety condition isn't met, such as the hood being unlatched, the vehicle not being in park, or a door being ajar. Other common reasons include a dead key fob battery, a check engine light, low fuel, or a vehicle in "valet mode". To fix it, check these conditions, ensure your key fob has a good battery, and try the remote start again. 
Common reasons and solutions
This video explains common reasons why Chevy remote start may not be working: 50sKurt of TradesYouTube · Nov 11, 2022

• Vehicle condition:
  • Hood unlatched: Make sure the hood is completely closed and latched. 
  • Not in park: The vehicle must be in park for remote start to function. 
  • Door ajar: All doors must be closed and locked. 
  • Valet mode: Valet mode disables remote start. To exit, press and hold the "lock" and "trunk" buttons on your key fob simultaneously until the parking lights flash twice. 
• Key fob:
  • Dead battery: The most common cause. Replace the battery (often a CR2032) in the key fob. 
• Vehicle health:
  • Check engine light: If the check engine light is on, the remote start is disabled. You will need to address the underlying issue. 
  • Low fuel: The system will not work if you have low fuel. 
  • Engine temperature: If the engine is too cold or oil pressure is too low, it may prevent remote start. 
• Usage and other issues:
  • Hazard lights: If the hazard lights are on, remote start may not work. 
  • Consecutive attempts: You may have to start the car with the key in the ignition if you've attempted too many remote starts in a row. 
  • Key in the car: If the key is in the ignition, remote start will not function. 
  • Reprogramming: The remote may need to be reprogrammed to the vehicle. 
  • Faulty hood pin switch: If the switch is broken, it can falsely signal that the hood is open.