How do you reset the maintenance light on a Toyota RAV4?

If the maintenance light on your Toyota RAV4 is illuminated, it's a sign that your vehicle is due for routine maintenance. Resetting the maintenance light is a simple process that can be done in just a few steps. In this article, we'll guide you through the steps to reset the maintenance light on your Toyota RAV4.

Steps to Reset the Maintenance Light on a Toyota RAV4

1. Turn off the engine and make sure the vehicle is in park.


2. Press and hold the odometer/trip meter reset button located on the dashboard.


3. While holding the reset button, turn the ignition to the "ON" position (do not start the engine).


4. Continue holding the reset button for about 5-10 seconds until the maintenance light blinks or turns off.


5. Release the reset button, and the maintenance light should now be reset.

If the maintenance light does not reset after following these steps, you may need to consult your owner's manual or contact a Toyota dealership for further assistance.

Reasons to Reset the Maintenance Light

The maintenance light on a Toyota RAV4 is designed to illuminate when the vehicle is due for routine maintenance, such as an oil change, tire rotation, or other scheduled service. Resetting the maintenance light is important for a few reasons:

• Accurate Maintenance Tracking: Resetting the light ensures that the vehicle's maintenance schedule is accurately tracked, helping you stay on top of recommended service intervals.


• Avoid Confusion: A persistent maintenance light can be confusing and may lead you to believe that your vehicle needs service when it doesn't.


• Maintain Optimal Performance: Regular maintenance, as indicated by the maintenance light, helps keep your Toyota RAV4 running at its best, improving fuel efficiency, performance, and longevity.

By following the steps outlined in this article, you can easily reset the maintenance light on your Toyota RAV4 and keep your vehicle in top condition.

How do I reset the maintenance light on my Toyota RAV4?

To reset the maintenance light on a Toyota RAV4, use the steering wheel controls to navigate to "Vehicle Settings" > "Scheduled Maintenance" on the multi-information display and select "Reset Data". For older models with a trip meter reset button, cycle to "Trip A," turn the ignition off, then turn it back on while holding the reset button until the light resets to all zeros. 
For newer models with a multi-information display (approx. 2019+) 
This video shows how to reset the maintenance light on a new Toyota RAV4: 1mBlu-TSXYouTube · Aug 6, 2023

1. Turn the ignition to the "on" position (but do not start the engine). 
2. On the steering wheel, press the left or right arrow button to navigate to the gear or settings icon. 
3. Use the up/down arrow buttons to scroll to Vehicle Settings and press "OK". 
4. Scroll down to Scheduled Maintenance and press "OK". 
5. Select Reset Data and then press "OK". 
6. When prompted, choose Yes and press "OK" to confirm. 
7. Turn the engine off and then restart it to ensure the light is off. 

For older models with a trip meter reset button (approx. 2006-2018)
This video demonstrates how to reset the maintenance light on an older Toyota RAV4: 42sThePracticalMechanicYouTube · Mar 13, 2023

1. Insert the key and turn it to the "on" position (do not start the engine). 
2. Use the display button on the steering wheel to cycle through the menus until "Trip A" is shown on the odometer's LCD screen. 
3. Turn the ignition key to the "off" position. 
4. Press and hold the "Disp" (display) button on the steering wheel. 
5. While still holding the button, turn the key back to the "on" position (do not start the engine). 
6. Continue holding the "Disp" button. The display will show dashes, and then a sequence of zeros will appear. Release the button once the zeros appear. 
7. Turn the ignition off and then start the car to confirm the maintenance light is gone. 

How to reset maintenance required light on 2010 Toyota RAV4?

To reset the 2010 RAV4 maintenance light, turn the key to the "on" position (without starting the engine), press the trip reset button until "TRIP A" is displayed, then turn the key off. With the key off, press and hold the trip reset button, turn the key back to the "on" position, and continue to hold the button until the dashes on the odometer flash and change to all zeros, then release the button.
 
This video demonstrates how to reset the maintenance light on a 2010 Toyota RAV4: 48sSimon Says GarageYouTube · Jan 4, 2024
Step-by-step reset procedure

1. Turn the key to the "on" position: Insert the key into the ignition and turn it to the first position, which is just before starting the engine. If you have a push-button start, press it twice with your foot off the brake pedal. 
2. Select "TRIP A": Use the trip reset button on the dashboard to cycle through the display until you see "TRIP A". 
3. Turn the key off: Turn the ignition completely off. 
4. Press and hold the trip reset button: While holding the trip reset button, turn the key back to the "on" position without starting the engine. 
5. Wait for the reset: Continue holding the button. The odometer will show dashes that flash and then change to zeros. 
6. Release the button: As soon as the zeros appear, release the button. 
7. Start the car: You can now start the engine, and the maintenance light should be off. 

What to do if it doesn't work

• Repeat the steps, ensuring you complete each action in the correct order.
• If the light remains on after a few attempts, it could indicate a more serious problem, and you should schedule a service appointment. 

How to reset maintenance light on Toyota RAV4 2015 push button start?

Wait a second press and hold the display. Button. Turn the key on. And then if you'll notice that goes down. And then it's reset then you can let go of the display. Button.

How to reset the maintenance light on a Toyota RAV4 2013?

To reset the 2013 RAV4 maintenance light, turn the key to the "ON" position (without starting the engine), press the odometer trip reset button until "TRIP A" appears, and then turn the key to "OFF". Next, hold the odometer button down while turning the key back to "ON," and continue holding for about 10 seconds until the light flashes, beeps, and goes out. Release the button, then start the engine to confirm the light is off. 
This video demonstrates how to reset the maintenance light on a 2013 Toyota RAV4: 44sBackyard ChevyYouTube · Jul 8, 2019
Step-by-step instructions

1. Position the ignition: Insert the key and turn it to the "ON" position, but do not start the engine. 
2. Set display to TRIP A: Press the trip meter reset button on the dashboard until the display shows "TRIP A". 
3. Turn the ignition off: Turn the key to the "OFF" position. 
4. Hold and turn the key: Press and hold the trip meter reset button, then turn the key back to the "ON" position without starting the engine. 
5. Hold for 10 seconds: Continue holding the button for at least 10 seconds. The maintenance light should start to flash and then turn off. 
6. Release and start the engine: Once the light is off, release the button. Start the car to ensure the maintenance light is reset. 
7. Repeat if necessary: If the light remains on, repeat the steps. If it still won't reset, schedule a service appointment as there may be an underlying issue, advises Savannah Toyota.