How do you reset the tire pressure light on a Lexus?
To reset the tire pressure light on a Lexus, inflate all tires to the recommended cold pressures and reset the TPMS using either a physical button (if your model has one) or the vehicle’s settings menu, then drive at highway speeds for about 10 minutes to relearn the sensors. Steps vary by model year, so consult your owner's manual for model-specific instructions.
Manual TPMS reset with a physical button (older Lexus models)
What this method covers
This approach applies to models that still use a direct TPMS sensor and a dedicated reset control. The location of the reset button can vary by year and trim, often placed under the dash near the steering column or in the glove box. If you cannot find a button, use the menu method instead.
- Make sure all tires are cold and inflated to the recommended pressures shown on the door jamb placard or in the owner's manual.
- Turn the ignition to ON without starting the engine.
- Press and hold the TPMS reset button until the TPMS indicator light blinks or goes out, then release.
- Wait a few seconds for the system to acknowledge the new baseline.
- Drive at around 50 mph (80 km/h) or faster for about 10 minutes to complete the relearn.
After completing these steps, the light should reset if the system has properly captured the new tire pressures. If it remains on, recheck pressures and consider a professional check for sensor faults or valve issues.
TPMS reset via settings menu (newer Lexus models)
What this method covers
Many modern Lexuses use a software-based TPMS reset or relearn process accessible through the vehicle’s infotainment or instrument cluster. This approach avoids button presses and is common on newer ES, RX, NX, LX, and UX models.
- Ensure all tires are cold and inflated to the recommended pressures.
- Power the vehicle and access the infotainment system or instrument cluster menu.
- Navigate to Settings > Vehicle (or Vehicle Settings) > TPMS > Reset or Relearn.
- Confirm the reset and wait for a confirmation message.
- Drive the car at highway speeds (about 50–60 mph / 80–97 km/h) for 10–20 minutes to complete the relearn.
When finished, the TPMS light should turn off if the sensors have relearned successfully. If the warning persists, recheck tire pressures, review recent tire work, or seek dealership assistance to test sensors.
What to do if the light won’t reset
A stubborn TPMS warning can indicate a sensor failure, a damaged valve stem, or a tire that is not at the correct pressure. If resets fail across both methods, have a professional diagnose the system; some Lexuses require battery-assisted sensors that may need replacement. Always ensure tires are cold before measuring and inflating to avoid inaccurate readings.
Summary
Resetting the tire pressure light on a Lexus involves correcting tire pressures first and then using the model-appropriate reset method—either a physical TPMS button on older vehicles or the Settings menu on newer ones—and finishing with a short drive to relearn the sensors. If issues persist, consult a dealer or tire professional.
How do I reset the tire pressure light on a Lexus?
To reset the Lexus tire pressure light, first ensure all tires are properly inflated to the correct pressure. Then, locate the TPMS reset button, which is often near the brake pedal or on the steering wheel controls, and press and hold it until the light flashes three times. If your car has a touchscreen, navigate to the "Vehicle" settings and find the TPMS calibration option.
Method 1: Using a physical reset button
This video demonstrates how to find and use the TPMS reset button on a Lexus RX: 48sXJLuxuryYouTube · Aug 1, 2019
- Inflate all tires to the recommended pressure found on the sticker in the driver's door jamb.
- Turn the ignition to the "ON" position, but do not start the engine.
- Locate the TPMS reset button. It's usually a small, round button located to the left of the steering column, above the accelerator pedal, or near the hood release lever.
- Press and hold the button until the tire pressure warning light on the dashboard flashes three times.
- Release the button, then start the engine. The light should be off after a few minutes of driving.
Method 2: Using the infotainment system
This video shows how to reset the TPMS using the infotainment system on a Lexus GX: 1mDriveway DudesYouTube · Sep 1, 2022
- Inflate all tires to the correct pressure.
- Turn the vehicle on.
- On the center display, select "Vehicle Settings".
- Navigate to "TPMS" or "TPMS Calibration".
- Press and hold the center button or the "OK" button until the light blinks three times.
- Drive for a few minutes, and the warning light should turn off.
Method 3: Driving to reset
This video explains that driving can be enough to reset the tire pressure light after correcting the tire pressure: 1mKeith BladeYouTube · Mar 23, 2025
- Ensure all tires are inflated to the correct pressure.
- Simply drive at a speed of 20-35 mph for about 10-20 minutes.
- The system may recalibrate and turn the light off automatically.
Important notes
- Check the spare tire: Some models have a sensor in the spare tire, so ensure it is also properly inflated.
- If the light persists: The warning light may indicate a faulty TPMS sensor, a low battery in a sensor, or another issue. If the light doesn't turn off after a manual reset and a drive, contact a dealer or a tire professional for a diagnostic check.
Why is my tire pressure light still on after filling tires in Lexus?
If the Lexus tire pressure light remains on after filling the tires, it's likely due to a bad TPMS sensor, a low battery in the sensor, or the system not being manually reset. You can try resetting the system yourself, but if that doesn't work, have the sensors checked at a tire shop.
This video explains why your TPMS light might be on even after filling your tires: 58sDriveway DudesYouTube · Sep 1, 2022
Possible causes
- Faulty sensor: The sensor in one or more tires may have failed. These sensors have batteries that can last 5-10 years and need replacing.
- Low sensor battery: The battery inside a TPMS sensor may be low, causing it to fail even if the tire pressure is correct.
- Needs a reset: After adjusting tire pressure, the system often requires a manual reset. Driving for several miles may also trigger an automatic reset in some vehicles.
- Temperature changes: Significant drops in temperature can cause tire pressure to decrease, triggering the light, especially if the pressure is already at the lower end of the acceptable range.
You can watch this video to learn how to reset the TPMS system on your Lexus: 1mDoctor ResetYouTube · Oct 2, 2024
How to fix it
- Manually check the pressure: Use a reliable tire gauge to ensure all tires are at the recommended pressure, which is listed on the sticker inside the driver's side door jamb. Don't just rely on the light's reading.
- Find and press the reset button: Locate the TPMS reset button, which is often found under the dashboard on the driver's side. The exact location varies by model.
- Reset the system:
- Turn the ignition to the "on" position without starting the engine.
- Press and hold the reset button until the indicator light blinks slowly three times.
- If your model has a display system, you may need to navigate through the menu to find the TPMS reset option.
- Drive for several miles: Drive at a consistent speed to allow the system to recalibrate and read the new pressure in each tire.
- Visit a tire shop: If the light is still on, the issue is likely a faulty sensor. A tire shop can quickly scan your tires to see which sensor needs replacement. This is often less expensive than going to a dealership.
This video shows how to check the tire pressure in your Lexus: 58sKeith BladeYouTube · Mar 23, 2025
How do you reprogram your Lexus PSI setting?
Press and hold the reset button until the tire pressure light blinks three times, then release it. 4. Start the vehicle and wait a few minutes for the system to reset.
Where is my TPMS reset button?
Your TPMS reset button is likely located under the steering wheel on the driver's side, but it can also be on the center console, in the glove box, or accessed through the vehicle's display menu. The exact location varies by make and model, so you should consult your car's owner's manual for specific instructions.
How to find the button
- Look for a physical button: Check the area under the steering wheel, often to the left of the steering column.
- Explore the center console or glove box: The button may be on the dashboard near the center console or inside the glove box.
- Check the dashboard menu: On newer cars, the reset is often done through the vehicle's information display or touchscreen. You may need to press a "Menu," "Settings," or "Vehicle" button to find "TPMS Calibration" or a similar option.
- Consult your owner's manual: This is the most reliable way to find the button or understand the reset procedure for your specific vehicle.
After you find the button
- With the ignition on (but the engine off), press and hold the button until the TPMS light flashes three times.
- Start the car: and wait about 20 minutes for the sensor to reset itself.
