How do you reset the trunk on a Subaru?

If you're having issues with your Subaru's trunk, such as it not opening or closing properly, resetting the trunk mechanism may help resolve the problem. This step-by-step guide will walk you through the process of resetting the trunk on a Subaru vehicle.

Steps to Reset the Trunk on a Subaru

1. Locate the trunk release button or lever inside your Subaru. This is typically located on the driver's side of the dashboard or on the floor near the driver's seat.


2. Press and hold the trunk release button or pull the trunk release lever for about 10-15 seconds. This will disengage the trunk latch and allow you to open the trunk manually.


3. Once the trunk is open, locate the trunk latch mechanism. This is usually located on the underside of the trunk lid.


4. Disconnect the electrical connector from the trunk latch mechanism. This will cut power to the trunk latch and allow you to reset the system.


5. Close the trunk lid and wait for about 30 seconds to a minute.


6. Reconnect the electrical connector to the trunk latch mechanism.


7. Try opening and closing the trunk a few times to ensure the reset was successful.

If the trunk still doesn't open or close properly after following these steps, there may be a more complex issue with the trunk latch mechanism or other electrical components. In that case, it's best to consult a Subaru dealership or a qualified automotive technician for further diagnosis and repair.

How to reset a Subaru trunk?

How to reset your Subaru rear hatch. When this issue is occurring, the car will beep three times each time you press the rear gate button. The natural response is to release the button once the car beeps. To reset the rear door, keep holding the rear hatch release button until you hear a soft “thuck”.

Why did my power liftgate stop working?

A power liftgate may not be working due to a blown fuse, a low or leaking hydraulic system, a bad switch, or a faulty liftgate actuator. Start by checking for simple issues like a blown fuse or a discharged battery, then move to more complex troubleshooting steps like inspecting hydraulic fluid levels, testing the switches, and resetting the vehicle's computer. 
Simple checks and solutions
This video demonstrates how to check the liftgate fuse and what to do if it's blown: 59sCARDIAX PLAYSYouTube · Aug 31, 2024

• Check the battery: A weak or failing battery can cause various electrical issues, including a non-functioning power liftgate. 
• Check fuses: Look for blown fuses in the fuse box and replace any that are broken. There may be a separate fuse for the power liftgate, so check your owner's manual for its location. 
• Reset the vehicle's body control module: Disconnecting the negative battery terminal for about 30 seconds can sometimes reset the system and resolve the issue. 
• Inspect the liftgate switch: Dirt and debris can cause the switch to malfunction. You can remove the switch and test it with a multimeter to see if it's working correctly. 

Hydraulic liftgate specific checks 
You can watch this video to see how to reset the power liftgate height: 1mTools and GadgetsYouTube · Apr 4, 2024

• Check hydraulic fluid: Ensure the hydraulic reservoir is full and check for any leaks around the cylinders, hoses, and fittings. 
• Inspect lines and connections: Look for any damage, leaks, or loose fittings in the hydraulic lines and connections. 

Advanced troubleshooting
This video explains how to find a bad switch or latch on a power liftgate: 59s1A Auto: Repair Tips & Secrets Only Mechanics KnowYouTube · Jul 22, 2020

• Test the actuator: If the button and switches seem to be working, the liftgate actuator may be the problem. You can test the actuator with a multimeter. 
• Check the latch: If the liftgate has power and ground, but still won't operate, the latch may be faulty. 
• Clear height settings: In some cases, a specific height has been set, and the liftgate won't open past that point. You may need to manually open the liftgate and hold the button until it beeps to reset the height. 

When to seek professional help
This video provides a demonstration of a potential power liftgate issue that can be resolved by a professional: 53sAdamPE21’s GarageYouTube · Nov 30, 2023

• If you are unable to diagnose the issue or perform the repairs, consider taking your vehicle to a professional.
• If your vehicle is new, the repair may be covered under warranty. 
• A professional can ensure the repair is done correctly and avoid further damage to your vehicle. 

How to reset trunk height on Subaru Outback?

So that is now our memory. Position so I just closed it. And we'll open this from the key fob. And we'll make sure that it opens to the correct. Amount. There you go not all the way.

Why is my Subaru trunk beeping and not opening?

All you're going to do is push. And hold that for about 5 or 6 seconds. And you should hear the latch. Either open or close depending on how it was when it was stuck.