Where is the fuel pump reset switch on a 2010 Ford f150?

The fuel pump reset switch on a 2010 Ford F150 is typically located under the hood, near the battery or fuse box. This switch is designed to reset the vehicle's fuel pump in the event of a problem, such as a stall or engine shutdown.

Locating the Fuel Pump Reset Switch

To find the fuel pump reset switch on your 2010 Ford F150, follow these steps:

• Open the hood of your vehicle and locate the battery or fuse box. The fuel pump reset switch is usually found in this general area.


• Look for a small, red or yellow button or switch that is labeled "Fuel Pump Reset" or something similar.


• The switch may be located on the side of the fuse box or on a separate mounting bracket near the battery.

If you're having trouble locating the fuel pump reset switch, consult your vehicle's owner's manual or contact a Ford dealership or certified mechanic for assistance.

Using the Fuel Pump Reset Switch

The fuel pump reset switch is designed to be used in the event of a fuel system issue, such as a stalled engine or a problem with the fuel pump. To use the switch:

• Locate the fuel pump reset switch as described above.


• Press and hold the switch for a few seconds, then release it.


• This will reset the fuel pump and may help resolve any issues you're experiencing with your vehicle's fuel system.

If the fuel pump reset switch does not resolve the issue, there may be a more serious problem with your vehicle's fuel system that requires further diagnosis and repair by a qualified mechanic.

Where is the fuel reset button on a Ford F-150?

For an older Ford F-150 (generally pre-2009), the fuel pump reset switch is a safety feature usually found on the passenger side footwell behind the kick panel, with a red button on top that you press to reset after an impact. For modern F-150s (generally 2009 and newer), there is no manual switch; the vehicle's restraint control module (airbag module) controls the fuel pump, and you may need to restart the engine a couple of times after a collision to reset it. 
For older F-150s (pre-2009) 
This video demonstrates how to locate and reset the fuel pump shut-off switch in older Ford F-150s: 58sDaddy DIY GrillingYouTube · Feb 10, 2024

1. Locate the switch: Look in the passenger side footwell, behind the kick panel (the panel at the bottom of the dashboard) to the left of the fuse box. 
2. Turn off the ignition: Ensure the key is in the off position. 
3. Check for leaks: Before resetting, inspect the fuel system for any leaks. 
4. Press the reset button: Push down firmly on the red button on top of the inertia switch until you hear a click. The switch is in the "down" or "on" position when reset and the "up" or "tripped" position when the button is raised. 
5. Verify the reset: Turn the ignition to the "on" position, wait a few seconds, then turn it back to "off" and re-check for leaks. 

For newer F-150s (2009 and newer)
This video explains how to reset the fuel pump in newer Ford F-150 models: 58sDaddy DIY GrillingYouTube · Feb 26, 2024

1. Inspect for damage: After a collision, first inspect the vehicle for any visible damage and confirm there are no fuel leaks. Have the fuel system inspected by a professional if needed. 
2. Use the ignition: With the key in the ignition, turn it to the "start" position, then turn it off. 
3. Restart the engine: Turn the key to the "on" position again to restart the engine. You may need to repeat these steps a couple of times. 
4. If you have a push-button start: Press the start button twice without your foot on the brake to cycle the ignition and reactivate the fuel system. 

Important considerations

• Modern vehicles: Models from 2009 onward no longer have the manually resettable inertia switch. Instead, the restraint control module monitors impact and controls power to the fuel pump. 
• Warning signs: If the engine cranks but won't start after a minor collision or hitting a large pothole, it could indicate the fuel pump shut-off has been triggered. 
• Professional inspection: Ford recommends having a dealer inspect the vehicle's fuel system after any collision. 
• Check fuses: If resetting the switch doesn't work, check the fuel pump fuse or relay in the fuse box under the hood. 

How do you reset the fuel pump shut off switch on a 2010 Ford F150?

Step two switch off the ignition. Step three switch to start. Position. Step four switch off the ignition. Step five switch on the ignition to reenable the fuel pump.

Where is the fuel pump reset switch located?

The fuel pump shut-off switch, also known as an inertia switch, is commonly located in the passenger side front footwell, often behind a kick panel or an access panel. Its exact location can vary by vehicle, so check the driver's side footwell for older models, behind the glove box, or in the luggage or trunk area, especially in SUVs. The switch is identifiable by a red button on top and is reset by pushing it until it clicks.
 
You can watch this video to learn how to reset the fuel pump shut off switch: 56sSimple Mechanic AdviceYouTube · Oct 31, 2024
General location

• Passenger side footwell: This is the most common location for many vehicles, especially newer models. You may need to remove a plastic kick panel or other access cover to see it. 
• Driver's side footwell: In some older vehicles, like certain Ford F-150s from 1990-1991, the switch is located on the driver's side. 
• Behind the glove box: Some models may have the switch located under the glove box. 
• Luggage or trunk area: In SUVs and some other vehicles, you may find the switch in a compartment in the rear, such as on the driver's or passenger's side quarter panel. 
• Check the owner's manual: If you can't find it, the owner's manual will have the precise location for your specific vehicle. 

This video shows the location of the fuel pump shut-off switch in an older Ford F-150: 54sDaddy DIY GrillingYouTube · Mar 17, 2024
How to reset

1. Turn the ignition off. 
2. Locate and inspect: the switch, making sure there are no fuel leaks before you reset it. 
3. Push the red button: firmly until you hear or feel a click. 
4. Turn the ignition on: for a few seconds, then turn it off again. 
5. Check again for any fuel leaks: after completing the reset. 

Where is the fuel pump fuse located on a 2010 Ford F150?

The 2010 Ford F-150 fuel pump fuse is #27, a 20-amp fuse located in the underhood fuse panel (Battery Junction Box). Due to a known issue where this fuse can overheat and melt, Ford service bulletins often recommend relocating the fuse to a different terminal to prevent a "crank, no start" condition.
 
This video shows the location of the fuel pump fuse and relay under the hood: 59sDaddy DIY GrillingYouTube · Feb 9, 2024
Location and identification

• Fuse location: Under the hood, in the main fuse box (often called the Battery Junction Box or BJB).
• Fuse number: #27.
• Amperage: 20-amp.
• Color: It is a yellow fuse. 

Common issue and solution

• The problem: The original wiring for fuse #27 can overheat and melt the fuse connections, leading to a fuel pump failure and a no-start condition. 
• The fix: A common and recommended solution is to relocate the fuse to a spare terminal (position #70) using a Ford repair kit. 
• Before proceeding: Before attempting repairs, inspect fuse #27 and its terminals for any signs of damage, overheating, or melting. 

This video demonstrates the recommended relocation of the fuel pump fuse: 1mfiveohmxcoYouTube · Apr 7, 2024