How fast is ChargePoint Level 2 charging?
ChargePoint Level 2 charging typically delivers about 3.8 kW to 12 kW of power, with most public stations operating around 6.6–7.2 kW. The exact speed depends on the charger model, the electrical service available at the installation, and the vehicle’s onboard charging capacity.
Understanding Level 2 charging and ChargePoint’s role
Level 2 charging uses a 240-volt supply with higher current than the standard Level 1 setup. It’s the common solution for overnight charging at home and for faster charging at workplaces and public locations. Across its product line, ChargePoint offers a range of Level 2 units whose maximum output is limited by the installed wiring, circuit capacity, and the vehicle’s ability to accept power. In practice, this means your charging speed can vary from one installation to another, even on the same network.
ChargePoint Level 2 charging speeds
To help you gauge what to expect, here are common output configurations you’ll encounter on ChargePoint devices and the approximate power they deliver.
- 16 A at 240 V ≈ 3.8 kW
- 24 A at 240 V ≈ 5.8 kW
- 32 A at 240 V ≈ 7.7 kW
- 40 A at 240 V ≈ 9.6 kW
- 50 A at 240 V ≈ 12 kW (though continuous output is typically kept at 40 A for reliability and code considerations)
In real-world use, most ChargePoint Level 2 charging you’ll encounter on public networks sits in the 6.6–7.2 kW range. High-end home configurations, such as a ChargePoint Home Flex, can reach up to about 12 kW if your home electrical service and your electric vehicle can accommodate it.
What affects the charging speed?
Several factors determine the actual rate you’ll achieve in a given situation. The most important ones are listed below.
- Vehicle onboard charger rating — how much power the car can accept at a time.
- Charger maximum output and configuration — the installed ChargePoint unit may be set for 16–50 A (or higher depending on model).
- Electrical service capacity — the home or facility’s available amperage and panel limitations.
- Wiring and cable length — losses and gauge influence the practical output.
- Load management and shared circuits — some installations manage power across multiple devices to avoid overloading the service.
- Ambient temperature and charging conditions — extreme heat or cold can affect charging efficiency and speed.
These factors mean your observed pace can be slower than the charger's maximum rating. If your vehicle cannot accept high power, you won’t see the highest possible rate regardless of the charger’s capability.
ChargePoint hardware options and what they mean for speed
ChargePoint offers a spectrum of Level 2 products, with different maximum outputs and installation contexts. Here are the typical capabilities you’ll encounter.
- ChargePoint Home Flex: configurable from about 16 to 50 A at 240 V, up to roughly 12 kW, designed for residential use. The continuous rating is usually aligned with a 40 A practical limit for reliability on typical home circuits.
- ChargePoint Home (older or compact units): commonly available in fixed configurations such as 16 A or 32 A, delivering approximately 3.8 kW or 7.7 kW respectively.
- ChargePoint Commercial Level 2 stations: targeted at workplaces and public networks, often delivering 6.6–9.6 kW per connector (27–40 A), with options for multiple connectors and load management.
Choosing the right ChargePoint Level 2 solution depends on your vehicle’s charging capability and your home or site electrical infrastructure. Always verify the device’s maximum output and the circuit’s capacity before installation.
Summary
ChargePoint Level 2 charging spans roughly 3.8 kW to 12 kW, with the most common public configurations around 6.6–7.2 kW. Real-world speed is influenced by the vehicle’s onboard charger, the installed charger’s settings, and the electrical service available. For planning purposes, many EV drivers experience about 20–30 miles of range added per hour on higher-end Level 2 settings, and significantly less on lower-power configurations. Always match your charger’s capabilities to your vehicle and home electrical system to optimize charging speed.
