How long is a 1952 Chevy truck?
Across Chevrolet’s 1952 pickup lineup, length varies by model and bed size. In general, you’re looking at roughly 195 inches for the half-ton, about 210–214 inches for the three-quarter-ton, and around 216–219 inches for the one-ton version.
Length by model (1952 Chevy Advance-Design pickups)
The following figures reflect typical overall lengths and wheelbases for Chevrolet’s main 1952 pickups, noting that cab and bed configurations can shift exact measurements slightly.
- Chevrolet 3100 (½-ton): wheelbase 114 inches; overall length about 195 inches (approximately 16 feet 3 inches).
- Chevrolet 3600 (¾-ton): wheelbase 125 inches; overall length about 210–214 inches (roughly 17 feet 6 inches to 17 feet 9 inches).
- Chevrolet 3800 (1-ton): wheelbase 131 inches; overall length about 216–219 inches (approximately 18 feet to 18 feet 3 inches).
In practice, variations in bed length, cab style, and optional equipment can push measurements by a few inches. If you’re restoring or authenticating a specific truck, the closest reference points are the factory wheelbase numbers (114, 125, and 131 inches) and the corresponding approximate overall lengths above.
Factors that influence overall length
Beyond model designation, several design choices from that era affect the truck’s final length. These include bed length options, cab configuration (two-door versus extended cabs in some markets), and any factory-installed extras or aftermarket modifications. For collectors and restorers, knowing the exact wheelbase is often more reliable than the overall length because it’s a constant anchor in the chassis layout.
Bed and cab configurations
Chevrolet offered different bed lengths and trim levels that could alter the overall footprint. Shorter beds generally reduced length, while longer bed options increased it. Cab design variations also contributed, though the wheelbase remained the primary determinant of the chassis layout.
Summary
The 1952 Chevrolet pickup lineup spans a range: roughly 195 inches for the half-ton (3100), about 210–214 inches for the three-quarter-ton (3600), and around 216–219 inches for the one-ton (3800). Wheelbases of 114, 125, and 131 inches correspond to these models, respectively. For precise measurements, especially for restoration or restoration-grade accuracy, consult the vehicle’s VIN and factory documentation or measure the actual wheelbase on the specific truck.
