How long is a 1957 Dodge Coronet?
The Dodge Coronet from 1957 is not a single fixed length; depending on the body style, overall length typically falls in roughly 200–210 inches (about 16.7–17.5 feet).
Context and variations in the 1957 Coronet
In 1957, Dodge introduced a full-size lineup built on Chrysler's C-Body platform. The Coronet served as the base trim within that range, and its overall length varied with body style and wheelbase options. This means a 1957 Coronet could be shorter or longer depending on whether it was configured as a 2-door or 4-door sedan, a hardtop, or a convertible.
Typical lengths by body style
The following ranges reflect common factory specifications from that era for the Coronet line. Exact figures can vary by sub-model and equipment.
- 2-door sedan: approximately 200–205 inches
- 4-door sedan: approximately 205–208 inches
- 2-door hardtop: approximately 204–206 inches
- Convertible (where offered): approximately 206–210 inches
These ranges illustrate the general scope of the Coronet's footprint in 1957. For a precise figure, one must identify the exact model code and refer to contemporary specifications.
How to verify the exact length for a specific car
To determine the precise overall length for a particular 1957 Dodge Coronet, follow these steps:
- Confirm the exact model year and body style from documentation or the car itself, since lengths vary by configuration.
- Consult original Dodge brochures or service catalogs for the 1957 Coronet to find the listed overall length for that configuration.
- Check the data plate (often on the door jamb) for model and wheelbase information that correlates with published specs.
- If possible, physically measure bumper-to-bumper on a level surface with the car properly supported.
With the correct model identity, you can determine the exact length for that specific Coronet configuration.
Summary
In short, the 1957 Dodge Coronet did not have a single length. Most configurations sit in the 200–210 inch range, with minor variations by body style. For collectors or restorers seeking precision, the best approach is to locate the exact model code in the brochures or data plates and, if needed, measure the vehicle directly.
How long is a 1956 Dodge Coronet?
1956 Dodge Facts – Chassis Features
Overall length: 212.0 inches. Overall width: 74.6 inches. Overall height: Coronet I-6 – 60.3 inches, Coronet and Royal V-8 – 60.6 inches,Custom Royal and D-500: 60.8 inches.
How long is a 1957 Chevy Bel Air in feet?
Second generation (1955–1957) The Bel Air received new, revamped styling for the 1955 model year. The Bel Air was 3,456 lb (1,568 kg) and 16 ft (4.9 m) long.
How long is a 1957 Plymouth?
1957 Plymouth Facts – Chassis Features
Wheelbase: 118 inches. Overall length: All: 204.6 inches. Front tread: 60.9 inches. Rear tread: 59.6 inches.
What is a Dodge Coronet worth today?
Typically, you can expect to pay around $14,460 for a 1965 Dodge Coronet in good condition with average spec.
