How long is a 1977 Ford Bronco?
The 1977 Ford Bronco is roughly 166 inches long, about 14 feet. Exact length can vary slightly depending on bumper design, top configuration, and aftermarket accessories.
Context: the Bronco’s first generation and its footprint
In 1977 the Bronco belonged to Ford’s first-generation line, produced from 1966 through 1977. The basic platform featured a compact, two-door SUV design with a short wheelbase and a rugged body. When people refer to the Bronco’s length, they’re typically citing the overall bumper-to-bumper measurement rather than just the body shell.
Key measurements for the 1977 Bronco
Below are the most commonly cited figures for stock, unmodified early Broncos. Note that aftermarket parts and top configurations can shift the overall length by a few inches.
- Overall length: approximately 166 inches (about 4.22 meters)
- Wheelbase: 92 inches (about 2.34 meters)
- Overall width: around 66 inches (about 1.68 meters)
- Overall height: typically about 73–75 inches depending on top and tire setup
These numbers reflect the standard factory specifications for the year and can vary slightly with different bumper styles, brush guards, or tire-and-wheel packages.
Factors that can alter the measured length
Several factors can cause a Bronco’s measured length to differ from the baseline figure. Bumpers, winches, aftermarket grilles, and front or rear accessories can add inches. The presence or absence of a removable top, cab soft-top, or hardtop can also affect the overall height and sometimes the perceived length when photographed from certain angles, though the measurement remains the same from bumper to bumper.
Practical implications for collectors and owners
For owners and buyers, the 166-inch length places the Bronco in a compact-to-mid-size SUV category, making it relatively easier to maneuver than larger classics while still offering genuine off-road capability. When planning storage, trailer compatibility, or garage space, using the bumper-to-bumper length provides a reliable guideline, with a small adjustment margin for aftermarket gear.
Summary
The 1977 Ford Bronco measures about 166 inches in overall length, with a 92-inch wheelbase. While the stock figure is widely cited, actual length can vary a few inches due to bumpers, tops, and aftermarket additions. This compact yet capable classic remains a recognizable staple of 1960s–70s American off-road design.
How long is a classic Ford Bronco?
around 152.1 inches
Measuring around 152.1 inches in overall length, the Early Bronco was designed for agility and ease of maneuverability. The wheelbase was around 92 inches. Obviously adding a front bumper or rear bumper with a tire carrier will add to the length of your Bronco.
What's the overall length of a Ford Bronco?
The overall length of a Ford Bronco depends on the model, with the two-door version being approximately 173.7 inches and the four-door version being 189.4 inches. The length can vary slightly based on specific trim levels and packages like the Bronco Raptor or Everglades, but these figures represent the standard lengths.
- Two-door: Approximately 173.7 inches.
- Four-door: Approximately 189.4 inches.
Keep in mind that this measurement is for the full-size Bronco and does not include the separate, smaller Bronco Sport model, which has its own dimensions.
What was the wheelbase of the 1977 Ford Bronco?
Built on a 92-inch wheelbase (sized between the CJ-5 and Scout; only an inch shorter than the later CJ-7), the Bronco used box-section body-on-frame construction. To simplify production, all examples were sold with four-wheel drive; a shift-on the-fly Dana 20 transfer case and locking hubs were standard.
How much longer is the 4 door Bronco?
The four-door Bronco is 189.4 inches long, 73 inches high, and has a wheelbase of 116.1 inches. On the other hand, the two-door Bronco measures 173.7 inches in length, 71.9 inches in height, and comes with a wheelbase of 100.4 inches.
