How many fuel pumps does a 2016 Dodge Challenger have?
In most 2016 Challenger models, there is one primary fuel pump located in the fuel tank. Some high-performance variants, notably the Hellcat, use two in-tank pumps to meet higher fuel demands, and engines with direct injection include a high-pressure fuel pump in the engine to pressurize fuel for the injectors.
Understanding the fuel-pump setup
Below is a concise outline of where pumps may be located and how they function across different trims.
- Primary in-tank electric fuel pump (low pressure) within the fuel module
- Dual in-tank pumps (two pumps in the same module) used on certain high-performance variants like the Hellcat
- High-pressure fuel pump (engine-mounted) for direct-injection engines
Not all engines use every element. The number of pumps can vary by trim and drivetrain, with the in-tank pump being standard and the high-pressure pump appearing only on direct-injection variants.
Trim-by-trim details
Standard and mid-range trims
Most 3.6L V6 and many 5.7L Hemi configurations rely on a single in-tank pump to supply fuel at the required pressure for the engine’s fuel system.
High-performance variants (Hellcat)
Hellcat models employ a dual-in-tank-pump setup to meet the higher fuel-flow demands of the turbocharged/supercharged system, along with a high-pressure pump as part of the direct-injection architecture on applicable engines.
Bottom line
The typical 2016 Dodge Challenger has one primary in-tank fuel pump. However, certain high-performance variants (notably the Hellcat) incorporate two in-tank pumps to handle increased fuel requirements, and engines with direct injection use a high-pressure pump in the engine. For an exact configuration, consult the vehicle’s VIN-specific documentation or service manual.
Summary
Overall, count one in-tank pump for most Challengers from 2016, with two in-tank pumps in the Hellcat models and an additional high-pressure engine-mounted pump on direct-injection engines. This configuration supports the range of engines offered that year, from standard V6 to high-performance variants.
How much does it cost to replace a fuel pump on a 2016 Challenger?
between $1,059 and $1,207
The average cost for a Dodge Challenger Fuel Pump Replacement is between $1,059 and $1,207. Labor costs are estimated between $157 and $230 while parts are priced between $903 and $977. This range does not include taxes and fees, and does not factor in your unique location.
How many fuel pumps does a 2016 Dodge Charger have?
A Dodge Charger typically has one fuel pump, located inside the fuel tank. Where is the fuel pump relay on a Dodge Charger? The location of the fuel pump relay on a Dodge Charger may vary, but it is commonly found in the engine compartment fuse/relay box.
How many fuel pumps does a Dodge Challenger have?
A Dodge Challenger has two fuel pumps, with a main primary pump and a secondary transfer or high-pressure pump, depending on the model and engine type. The dual-pump system is especially common in V8 and Hellcat models, which have a saddle-style fuel tank with a separate reservoir on each side, requiring two pumps to ensure fuel can be sent to the primary pump from both sides of the tank.
- Primary pump: Located in the fuel tank, this is the main pump that sends fuel to the engine.
- Secondary pump: This pump is also in the fuel tank, located on the opposite side of the saddle-style tank from the primary pump. Its role is to transfer fuel from the other reservoir to the primary pump.
- High-pressure pump: In some modern vehicles, especially those with gasoline direct injection (GDI), a second pump is a high-pressure pump located near the fuel rail in the engine compartment.
Where is the fuel pump on a Dodge Challenger?
The Dodge Challenger's fuel pump is located inside the gas tank, accessed by removing the rear seat. For most modern Dodge Challengers, the fuel pump assembly is on top of the fuel tank, underneath the rear seat.
This video shows the process of accessing the fuel pump in a Dodge Challenger: 47sJohn Richie QuillopoYouTube · Aug 31, 2025
- Primary location: Inside the fuel tank.
- Access point: By removing the rear seat, you can access the fuel pump assembly located on top of the tank.
- Model variations: Depending on the model year, some Challengers may have a U-shaped tank with two pumps that need to be connected inside.
