How many gallons does a 2013 Ford Explorer hold?
The 2013 Ford Explorer's fuel tank capacity is 20.0 gallons (75.7 liters).
This capacity applies to most Explorer trims and drivetrain configurations from that model year, influencing how far you can drive between fills. The following explainer covers the official tank size, potential variations, and how that translates into real‑world range.
Official tank size and what it means on the road
The standard fuel tank in the 2013 Explorer is listed as 20.0 gallons. That refers to the total tank volume. The amount of usable fuel before reserve is slightly less, and the display of remaining miles can vary based on gauge calibration and driving conditions. Tank capacity tends to be consistent across typical 2WD and 4WD configurations for this year, though minor differences by trim or market can occur; always verify with the owner’s manual or the door placard for your exact vehicle.
Drivetrain considerations
For the vast majority of 2013 Explorers, the 20.0-gallon tank is standard across both two-wheel drive and all-wheel drive variants. If you have a specific vehicle, check the VIN or the fuel-filler door placard for precise capacity, since production differences are possible by market or trim level.
Estimating driving range per tank
Range depends on engine choice and driving style. With a 20.0-gallon tank, real-world miles per tank typically fall within the low hundreds when driving conservatively, and can approach around 400–500 miles on a long highway trip with favorable fuel economy. To estimate your own range, multiply your vehicle’s miles-per-gallon by 20.0 gallons.
Summary
The 2013 Ford Explorer generally holds 20.0 gallons of gasoline in its fuel tank, providing a practical range that varies with engine, drivetrain, and driving conditions. For the most accurate figure, consult your vehicle’s owner’s manual or the fuel filler door placard.
How much gas does a 2013 Ford Explorer hold?
The 2013 Ford Explorer has a gas tank capacity of approximately 18.6 gallons. This capacity is consistent across various trims and engine types for the model year.
- Fuel tank capacity: 18.6 gallons
- Details: This is the standard capacity for the 2013 model year.
How many quarts does a 2013 Ford Explorer 3.5 L take?
Oil Grade: SEO19
| Viscosity: | 5W-30 (All TEMPS) |
|---|---|
| Capacity: | 6 quarts (with filter). After refill check oil level. |
| Torque: | 20 ft/lbs (Oil Drain Plug) |
What year Explorer to stay away from?
You should stay away from the 2002–2006 Ford Explorer models due to frequent and expensive transmission problems, engine issues, and suspension wear. Other years to avoid include the 2016 and 2020 models, which have reported issues with electrical systems, faulty parts, and transmission problems.
Model years to avoid
- 2002–2006: The third generation is widely considered the least reliable due to significant transmission failures, engine problems (like timing chain issues), and premature suspension wear. The 2002 model year has the highest number of overall complaints, primarily for its transmission.
- 2016: This model year has been criticized for issues like faulty fuel tanks and suspension components, as well as poor rearward visibility and lack of interior storage.
- 2020: As the first year of the current design, the 2020 model is noted for a high number of recalls, particularly involving transmission problems that can cause stalling and power loss.
Other years with potential issues
- 2011–2019: This generation has drawn complaints about electrical system problems.
- Early 2021 models: Some 2021 models built in late 2020 and early 2021 had issues, though later models made in late 2021 are generally considered more reliable.
How many gallons is a Ford Explorer full tank?
20.2 gallons
The Ford Explorer has a fuel tank size of 20.2 gallons, depending on which Explorer trim level drivers get. The long list of different Explorer trim levels presents different gas tank sizes as well, which fits the gas mileage each model provides.
