How many litres of engine oil does a Toyota Land Cruiser take?
The answer varies by model and engine, but most common Land Cruisers use roughly 7.5 litres of oil with a filter for the popular V8 engines, with smaller gas engines around 6.4 litres and diesel variants closer to 9 litres.
Engine oil capacity on a Toyota Land Cruiser depends on the generation, market, and the specific engine installed. Always consult the owner’s manual or a Toyota dealer for your exact spec, and remember that capacities are specified with the oil filter in place; without the filter the amount can be lower by a litre or so. The figures below reflect typical values you may encounter on mainstream LC200/200 Series and Prado/J150 models.
Oil capacity by engine type
For clarity, the following entries provide representative capacities for common Land Cruiser engines. The numbers include oil with the filter installed, where applicable.
Gasoline engines
- 5.7L V8 (1UR-FE) — about 7.5 litres with filter
- 4.0L V6 (1GR-FE) — around 6.4 litres with filter
These figures cover the gasoline-powered J200/Land Cruiser variants and the Prado/J150 models that use these engines. Always verify with your specific model year documentation to account for minor variances.
Diesel engines
- 4.5L turbo diesel (1VD-FTV) — approximately 9.0 litres with filter
Diesel variants, particularly the 4.5L turbo diesel found in some LC200/J200 and 70 Series configurations, typically require more oil due to larger displacement and cooling requirements. Exact capacity can vary by market and engine spec, so confirm with the manual for your exact vehicle.
Practical notes for owners
When planning an oil change, consider these practical points:
- Always use the recommended oil grade for your engine and climate as specified in the owner's manual.
- account for the oil filter change, which typically adds about 0.5–1.0 litre to the total: the filter is part of the capacity in most official specs.
- If you’re mixing engine types across markets (for example, importing a variant), verify the specific capacity for that engine code (e.g., 1UR-FE vs 1GR-FE vs 1VD-FTV).
In short, while the Land Cruiser family shares many parts and design cues, oil capacity is not one-size-fits-all. A quick check of the exact engine code and year will ensure you have the correct litres for your vehicle.
Summary
Engine oil capacity for the Toyota Land Cruiser depends on the engine and year. Typical figures are around 7.5 litres for the 5.7L V8, about 6.4 litres for the 4.0L V6, and near 9.0 litres for the 4.5L diesel. Always verify the precise specification in the owner's manual or with a Toyota dealer for your exact model.
