How many miles does a 2010 Chevy Cobalt get?
The 2010 Chevy Cobalt generally delivers about 28–29 miles per gallon (mpg) in mixed driving, with city mileage around the mid-20s and highway mileage in the low-to-mid 30s, depending on the engine and transmission chosen. Real-world results can vary based on a number of factors.
Below is a detailed look at how the drivetrain options for the 2010 Cobalt influenced fuel economy, based on EPA estimates and typical configurations. This helps explain why two cars that look similar can have different mileage numbers.
EPA-estimated fuel economy by engine and transmission
The following figures reflect EPA estimates for common 2010 Cobalt configurations. Real-world mileage varies with factors like tire choice, maintenance, driving style, and payload.
- 2.2L Ecotec I-4 with 5-speed manual: ~25 mpg city, ~34 mpg highway; combined around 29 mpg.
- 2.2L Ecotec I-4 with automatic: ~25 mpg city, ~34 mpg highway; combined around 28–29 mpg.
- 2.4L I-4 engine (where equipped) with automatic: ~23 mpg city, ~32–33 mpg highway; combined around 27–28 mpg.
- Cobalt SS Turbo (2.0L turbo) with manual: ~18–20 mpg city, ~28–30 mpg highway; combined around 23–25 mpg.
In practical terms, non-SS models tend to land in the high-20s mpg combined, while the performance-oriented SS Turbo is less fuel-efficient in city driving but can still achieve solid highway mileage when cruising.
Notes on real-world mileage
Actual fuel economy depends on terrain, climate control use, maintenance, tire condition, and driving habits. To maximize efficiency, keep tires inflated to the recommended pressure, perform regular maintenance, and adopt smooth acceleration and steady speeds where possible.
Tips to improve MPG
- Maintain proper tire pressure and align wheels as needed.
- Use cruise control on highways when appropriate.
- Lighten payload and remove unnecessary roof racks when not in use.
- Follow the manufacturer’s maintenance schedule (air filters, spark plugs, oxygen sensors, etc.).
Summary: The 2010 Chevy Cobalt offered multiple configurations with EPA-estimated mpg ranging from the high 20s combined for most models to the low 20s for the SS Turbo, with highway mileage generally higher than city mileage. Check your exact trim and transmission for the precise rating.
Summary
Across its lineup, the 2010 Cobalt typically delivers around 28–29 mpg combined on non-performance models, with city mpg in the mid-20s and highway mpg in the low-to-mid 30s. The Cobalt SS Turbo is less efficient in city driving but can approach similar highway efficiency when cruising. For the most accurate figure, reference the exact trim and transmission of the vehicle in question and consider real-world testing.
Is the 2010 Chevy Cobalt a reliable car?
Reliability. The 2010 Chevrolet Cobalt has a 3 years / 36,000 miles basic warranty and 6 recalls. RepairPal gives it a reliability rating of 4 out of 5, ranks it #5 out of 46 among Compact Cars.
How many miles can you get out of a 2010 Chevy Cobalt?
According to thedriveradviser.com, a good Chevy Cobalt should last 190,000-210,000 miles with proper maintenance. It's natural for a car to break at some point, but other items will also influence how long it will survive.
Can a Chevy Cobalt last 300,000 miles?
It's not uncommon for them to exceed 300k with basic maintenance, so long as rust or an accident doesn't take it off the road. 212k miles on my 09 G5. Chain rattles a bit at start, but still has original chain. Regular oil changes are important.
What is the most common problem with the 2010 Chevy Cobalt?
Top 2010 Chevrolet Cobalt Problems
- Ignition Key Stuck Due to Failed Shifter.
- Check Engine Light and Misfire Due to Ignition Module/Coil Failure.
- Broken Timing Chain.
- Check Engine Light Due to Gas Cap Issue.
- Chevrolet Cobalt stalling issue at stop signs and during idling with fluctuating RPMs.
