How many quarts does a 2015 5.3 Silverado take?
The 2015 Chevrolet Silverado with the 5.3L V8 uses about six quarts of engine oil when you perform a standard oil change with the filter installed (roughly 5.7 liters). If you are not replacing the filter, expect around five quarts (approximately 4.7 liters). Always verify the oil level with the dipstick after filling.
Oil capacity specifics for the 5.3L EcoTec3 V8
These figures refer to a typical service and assume the use of a standard GM oil filter and Dexos1 Gen 2 oil. The official specification lists 6 quarts with the filter; the filter itself accounts for roughly half a quart of capacity. In some configurations (such as with an oil cooler or other optional equipment), the exact amount can vary slightly. Always consult the vehicle’s owner manual and verify the level with the dipstick.
Below are the standard capacities you would use during a typical oil change:
- With filter installed: 6 quarts (5.7 L)
- Without filter: about 5 quarts (4.7 L)
These figures apply to a conventional oil change using a GM-approved filter. After adding oil, recheck the level with the dipstick and adjust as needed to reach the correct mark.
Practical tips for confirming the correct oil level
To ensure you hit the correct mark after a fill, check the level on a warm engine, on a level surface, with the oil cap removed, and allow a moment for the oil to settle. If in doubt, consult a professional mechanic or your local dealership.
Summary
For the 2015 Silverado with a 5.3L V8, plan on about 6 quarts of engine oil when performing an oil change with the filter (roughly 5.7 liters). If you’re not replacing the filter, roughly 5 quarts should be sufficient (about 4.7 liters). Always verify with the dipstick and refer to the owner's manual for your exact configuration.
