How many quarts does a 2.4 l Dodge Journey take?
The 2.4 L Dodge Journey typically requires about 4.5 quarts of engine oil when performing an oil change with a new filter. If you replace the oil but don’t install a new filter, the total can be around 4.3 quarts. Always confirm the final level with the dipstick after you add oil.
Context: Dodge Journeys equipped with the 2.4-liter inline-4 (World engine family) use a standard oil capacity that can vary slightly by model year, oil filter size, and regional specs. This article provides the official capacity figure and practical maintenance notes to help you fill correctly and avoid under- or overfilling your engine.
Official engine oil capacity for the 2.4 L Journey
Note: The following capacity refers to a normal oil change with a new filter. Actual needs may vary due to filter size or engine variant by year.
- Engine oil capacity with filter: 4.5 quarts (4.3 L).
Bottom line: For a standard oil change on a 2.4 L Dodge Journey, plan to use about 4.5 quarts of oil and then top up to the full mark on the dipstick as needed.
Year-specific notes
While 4.5 quarts is a common figure, some early 2.4 L Journeys may have slight variations depending on the exact engine variant and the size of the oil filter. Always refer to the owner's manual or dealer service data for your VIN to confirm the exact amount.
Practical maintenance reminders
After pouring in the oil, run the engine for a minute, shut off, wait a few minutes, and recheck the level with the dipstick. Top off in small increments to reach the full mark. Use the recommended oil type and viscosity for your climate (typically 5W-30 in many markets, but confirm based on your region).
Summary
The 2.4 L Dodge Journey generally takes about 4.5 quarts of engine oil during an oil change with a new filter, with about 4.3 quarts if a filter isn’t replaced. Always verify the final oil level with the dipstick after filling and consult your owner’s manual for any year-specific differences.
