How many quarts of oil does a 08 e250 5.4 take?
About 6 quarts (roughly 5.7 liters) of engine oil are required for a standard oil change on a 2008 E-250 equipped with the 5.4-liter V8, including the oil filter.
This article explains the official capacity for this engine, notes how the figure changes if you replace or reuse the filter, and offers guidance on how to verify the correct fill level after an oil change.
Oil capacity specifics for the 5.4L E-Series
The typical engine oil capacity for the 5.4L V8 in the 2008 E-250 is listed as 6 quarts (about 5.7 liters) with the oil filter installed. If you drain the oil and do not replace the filter, you’ll generally need around 5 quarts. After adding oil, always check the level with the dipstick and top up to the full mark as needed.
Notes and practical considerations
Capacities can vary slightly due to production differences, aftermarket filters, or engine variations. Always refer to the owner’s manual or Ford's service data for the exact specification for your vehicle VIN. The recommended oil viscosity for many 5.4L engines from this era is typically 5W-20, though some conditions may warrant 5W-30; follow the specification on the fill cap or in the manual.
Summary
For a 2008 Ford E-250 with a 5.4L V8, plan on about 6 quarts of engine oil for a standard oil change with a new filter, using the grade specified by Ford. Verify the level with the dipstick after filling to ensure you reach the full mark.
