Loading

How many quarts of oil does a 2011 Chevy HHR take?

The 2011 Chevy HHR uses two different oil capacities depending on the engine: 4 quarts for the 2.2L Ecotec and 5 quarts for the 2.4L Ecotec.


In detail, the HHR offered two gasoline engines that determine the oil fill. The 2.2L L61 engine requires about 4 quarts of oil with a new filter, while the 2.4L LE5 engine requires about 5 quarts with a new filter. Oil type and fill procedures follow GM Dexos-approved lubricants and service guidelines.


Engine options and oil capacities


To keep the information clear, here are the capacities tied to each engine option available in the 2011 HHR:



  • 2.2L Ecotec L61 — oil capacity: 4 quarts with filter

  • 2.4L Ecotec LE5 — oil capacity: 5 quarts with filter


Note: These figures are general guidelines. Exact capacity can vary slightly depending on the specific vehicle configuration, the oil filter type, and any service bulletins. Always confirm with your owner's manual or a GM service reference for your vehicle’s VIN.


Oil type and service guidelines


Regardless of engine, use a Dexos-approved motor oil of the appropriate viscosity, typically 5W-30 for most 2011 HHR models. When performing an oil change, replace the oil filter, dispose of used oil responsibly, and after adding oil, run the engine briefly and recheck the level with the dipstick, topping off if necessary to reach the full mark.


Summary


In short, the 2011 Chevy HHR takes about 4 quarts with the 2.2L engine and about 5 quarts with the 2.4L engine. Verify the exact capacity for your VIN, use Dexos-approved 5W-30 oil, and always recheck the oil level after a fill.

How much oil does my HHR take?


Engine Oil
5 quarts (with filter).



How many quarts of oil for a 2011 Chevy HHR?


5 quarts
Engine Oil
Capacity: 5 quarts (with filter). After refill check oil level.



What oil does the 2.2 L Chevy HHR LT take?


Mobil 1 – Extended Performance 5W-30 High Mileage Full Synthetic Motor Oil, 5 Quart (Part No. 15021)



How many quarts of oil does a 1.6 L engine take?


A 1.6L engine typically takes around 4 to 4.5 quarts of oil, but the exact amount varies by vehicle make and model, so you should always check your owner's manual for the precise capacity. For example, a 1.6L EcoBoost engine takes about 4.3 quarts (4.1 L) with a filter change, while a different model might specify 4 quarts (3.8 L). 
How to find the correct amount for your vehicle

  • Consult your owner's manual: This is the most accurate source for your specific vehicle's oil capacity. 
  • Check online resources: Websites like AMSOIL provide specifications for various makes and models by entering your car's details. 

Important tips
  • Always include the oil filter: The capacity is usually quoted for an oil and filter change. 
  • Don't overfill: Overfilling can cause serious engine damage. Always add the specified amount and then check the dipstick to ensure the level is between the "min" and "max" marks. 
  • Drain completely: The amount you pour in can be affected by how long the old oil is left to drain. 


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.