How many quarts of oil does a 2012 F550 take?
For the 2012 Ford F-550, oil capacity depends on the engine. The gasoline-powered 6.8-liter Triton V10 uses about 6 quarts of oil, while the diesel-powered 6.7-liter Power Stroke requires about 13 quarts, including the filter. Always verify with your vehicle's manual or under-hood sticker for the exact figure.
In 2012, the F-550 offered multiple powertrains—from a gas V10 to a turbo-diesel Power Stroke—so oil capacity varied by configuration. This article explains the typical capacities for the two common engines and what to check when performing an oil change.
Engine options and oil capacities
Note: The following outlines the standard oil capacities for the two primary engine options commonly found in 2012 F-550 models.
- 6.8-liter Triton V10 gasoline engine: typically about 6 quarts of engine oil, including the filter.
- 6.7-liter Power Stroke diesel engine: typically about 13 quarts of engine oil, including the filter.
Note: Some configurations may have slightly different capacities due to variants or service considerations. Always confirm with the official manual or Ford service documentation for your exact model and engine code.
Practical guidance for oil changes
Before performing an oil change, prepare the right amount of oil based on your engine, and ensure you use the correct filter compatible with the engine family. If you’re unsure, consult a Ford service technician or the vehicle’s owner’s manual.
Tips for accuracy and maintenance
Keep a record of your oil changes, check the level on a warm engine on level ground, and use the recommended viscosity and specification per Ford’s guidelines.
Summary
Summary: The 2012 F-550’s oil capacity is engine-specific—roughly 6 quarts for the gasoline 6.8L Triton V10 and about 13 quarts for the 6.7L Power Stroke diesel. Always verify the exact capacity for your truck's engine variant in the owner’s manual or on the under-hood sticker, and use the recommended oil type and filter during changes.
How much oil does a 2012 Ford f550 take?
Capacity: 13.1 quarts (with filter).
What is the best oil to run in a 6.2 Ford V8?
2022–2020 F-250
6.2L Gas V8 (common on these years): Ford specifies SAE 5W‑20 meeting WSS‑M2C945‑A/B.
How much oil does a 6.8 L f550 take?
Capacity: 7 quarts (with filter).
How much oil does a 2012 6.7 Powerstroke take?
The 2012 6.7 Powerstroke has an oil capacity of 13 quarts (12.3 liters) when changing the filter. It's important to use an oil that meets the Ford WSS-M2C171-F1 specification, such as Motorcraft 10W-30 or 15W-40 depending on your climate.
- Capacity: 13 quarts with filter.
- Oil Specification: Use an oil that meets the Ford WSS-M2C171-F1 specification.
- Viscosity: Ford recommends 10W-30 for colder climates and 15W-40 for normal conditions.
- Checking the level: After refilling, always check the oil level on the dipstick and add more if necessary.
